[PATCH 4/9] arm64: dts: qcom: x1e78100-lenovo-thinkpad-t14s: Explicitly enable used audio codecs

[Stephan Gerhold]

Currently, the macro audio codecs are enabled by default in x1e80100.dtsi.
However, they do not probe without the ADSP remoteproc, which is disabled
by default. Also, not all boards make use of all the audio codecs, e.g.
there are several boards with just two speakers. In this case, the
&lpass_wsa2macro is not used.

In preparation of disabling the audio codecs by default in x1e80100.dtsi,
add the missing status lines to explicitly enable the used audio codecs.

Signed-off-by: Stephan Gerhold <stephan.gerhold@xxxxxxxxxx>
---
 .../boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi     | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi
index 4cf61c2a34e31233b1adc93332bcabef22de3f86..5816b7d5cc5492771d2d1e675ee3e09a86b07ae4 100644
--- a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi
@@ -967,7 +967,13 @@ touchscreen@10 {
 	/* TODO: second-sourced touchscreen @ 0x41 */
 };
 
+&lpass_rxmacro {
+	status = "okay";
+};
+
 &lpass_tlmm {
+	status = "okay";
+
 	spkr_01_sd_n_active: spkr-01-sd-n-active-state {
 		pins = "gpio12";
 		function = "gpio";
@@ -977,12 +983,22 @@ spkr_01_sd_n_active: spkr-01-sd-n-active-state {
 	};
 };
 
+&lpass_txmacro {
+	status = "okay";
+};
+
 &lpass_vamacro {
 	pinctrl-0 = <&dmic01_default>;
 	pinctrl-names = "default";
 
 	vdd-micb-supply = <&vreg_l1b_1p8>;
 	qcom,dmic-sample-rate = <4800000>;
+
+	status = "okay";
+};
+
+&lpass_wsamacro {
+	status = "okay";
 };
 
 &mdss {

-- 
2.50.1