Re: [PATCHv2 2/3] wifi: ath9k: ahb: add led pin OF support

[Krzysztof Kozlowski]

On 12/08/2025 21:23, Rosen Penev wrote:
> The old and removed platform code had support for assigning a value for
> the LED pin for when the default is not correct. Effectively a fix for a
> non working LED.
> 
> For setting an LED to active high, a negation of led-active-low is used,
> as two drivers currently use that and no drivers use led-active-high or
> something similar.
> 
> Signed-off-by: Rosen Penev <rosenp@xxxxxxxxx>
> ---
>  drivers/net/wireless/ath/ath9k/init.c | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
> index c911b178dcc2..7826b113235d 100644
> --- a/drivers/net/wireless/ath/ath9k/init.c
> +++ b/drivers/net/wireless/ath/ath9k/init.c
> @@ -662,6 +662,17 @@ static int ath9k_of_init(struct ath_softc *sc)
>  	if (ret == -EPROBE_DEFER)
>  		return ret;
>  
> +	np = of_get_child_by_name(np, "led");
> +	if (np && of_device_is_available(np)) {

You are open-coding of_get_available_child_by_name().

> +		u32 led_pin;
> +
> +		if (!of_property_read_u32(np, "reg", &led_pin))
> +			ah->led_pin = led_pin;
> +
> +		ah->config.led_active_high = !of_property_read_bool(np, "led-active-low");
> +		of_node_put(np);
> +	}

Leaking OF node.

> +
>  	return 0;
>  }
>  


Best regards,
Krzysztof