[PATCHv2 3/3] mips: qca: use led-sources for WMAC LED

[Rosen Penev]

The ath9k driver creates an LED unconditionally being driven with
sometimes the wrong pin. Not only that, the current dts definitions have
LEDs for the WMAC that do not behave in response to it. Fix both issues.

Signed-off-by: Rosen Penev <rosenp@xxxxxxxxx>
---
 arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts | 10 +++++-----
 arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts   | 10 ++++------
 arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts      | 10 ++++------
 3 files changed, 13 insertions(+), 17 deletions(-)

diff --git a/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts b/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
index a7901bb040ce..344e1a2ee6ea 100644
--- a/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
+++ b/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
@@ -56,11 +56,6 @@ led-2 {
 			label = "tp-link:green:qss";
 			gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
 		};
-
-		led-3 {
-			label = "tp-link:green:wlan";
-			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
-		};
 	};
 };
 
@@ -111,4 +106,9 @@ partition@2 {
 
 &wifi {
 	status = "okay";
+
+	led {
+		reg = <9>;
+		led-active-low;
+	};
 };
diff --git a/arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts b/arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts
index 37a74aabe4b4..573ca7752698 100644
--- a/arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts
+++ b/arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts
@@ -22,12 +22,6 @@ memory@0 {
 	leds {
 		compatible = "gpio-leds";
 
-		led-wlan {
-			label = "dragino2:red:wlan";
-			gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
 		led-lan {
 			label = "dragino2:red:lan";
 			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
@@ -101,4 +95,8 @@ spiflash: w25q128@0 {
 
 &wifi {
 	status = "okay";
+
+	led {
+		reg = <0>;
+	};
 };
diff --git a/arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts b/arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts
index a7108c803eb3..6891d9589b68 100644
--- a/arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts
+++ b/arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts
@@ -22,12 +22,6 @@ memory@0 {
 	leds {
 		compatible = "gpio-leds";
 
-		led-wlan {
-			label = "tp-link:green:wlan";
-			gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
 		led-lan {
 			label = "tp-link:green:lan";
 			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
@@ -117,4 +111,8 @@ spiflash: s25sl032p@0 {
 
 &wifi {
 	status = "okay";
+
+	led {
+		reg = <0>;
+	};
 };
-- 
2.50.1