Re: [PATCH] spi: spi-qpic-snand: handle 'use_ecc' parameter of qcom_spi_config_cw_read()

[Konrad Dybcio]

On 8/8/25 7:15 PM, Gabor Juhos wrote:
> During raw read, neither the status of the ECC correction nor the erased
> state of the codeword gets checked by the qcom_spi_read_cw_raw() function,
> so in case of raw access reading the corresponding registers via DMA is
> superfluous.
> 
> Extend the qcom_spi_config_cw_read() function to evaluate the existing
> (but actually unused) 'use_ecc' parameter, and configure reading only
> the flash status register when ECC is not used.
> 
> With the change, the code gets in line with the corresponding part of
> the config_nand_cw_read() function in the qcom_nandc driver.
> 
> Signed-off-by: Gabor Juhos <j4g8y7@xxxxxxxxx>
> ---
>  drivers/spi/spi-qpic-snand.c | 11 ++++++++---
>  1 file changed, 8 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/spi/spi-qpic-snand.c b/drivers/spi/spi-qpic-snand.c
> index 7b76d2c82a5287df13ee6fcebc4abbe58ca861ee..119003c4784890458a41c67fa8bc17d721030b0d 100644
> --- a/drivers/spi/spi-qpic-snand.c
> +++ b/drivers/spi/spi-qpic-snand.c
> @@ -494,9 +494,14 @@ qcom_spi_config_cw_read(struct qcom_nand_controller *snandc, bool use_ecc, int c
>  	qcom_write_reg_dma(snandc, &snandc->regs->cmd, NAND_FLASH_CMD, 1, NAND_BAM_NEXT_SGL);
>  	qcom_write_reg_dma(snandc, &snandc->regs->exec, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
>  
> -	qcom_read_reg_dma(snandc, NAND_FLASH_STATUS, 2, 0);
> -	qcom_read_reg_dma(snandc, NAND_ERASED_CW_DETECT_STATUS, 1,
> -			  NAND_BAM_NEXT_SGL);
> +	if (use_ecc) {
> +		qcom_read_reg_dma(snandc, NAND_FLASH_STATUS, 2, 0);

Why are we reading 2 registers (the 2 in the func call) here, but 1 everywhere
else?

Konrad

> +		qcom_read_reg_dma(snandc, NAND_ERASED_CW_DETECT_STATUS, 1,
> +				  NAND_BAM_NEXT_SGL);
> +	} else {
> +		qcom_read_reg_dma(snandc, NAND_FLASH_STATUS, 1,
> +				  NAND_BAM_NEXT_SGL);
> +	}
>  }
>  
>  static int qcom_spi_block_erase(struct qcom_nand_controller *snandc)
> 
> ---
> base-commit: 13d0fe84a214658254a7412b2b46ec1507dc51f0
> change-id: 20250805-qpic-snand-handle-use_ecc-de929376d50b
> 
> Best regards,