[PATCH] watchdog/softlockup: fix wrong output when watchdog_thresh < 3

[yaozhenguo]

From: ZhenguoYao <yaozhenguo1@xxxxxxxxx>

When watchdog_thresh is below 3, sample_period will be less than 1 second.
So the following output will print when softlockup:

CPU#3 Utilization every 0s during lockup

Fix this by changing time unit from seconds to milliseconds.

Signed-off-by: ZhenguoYao <yaozhenguo1@xxxxxxxxx>
---
 kernel/watchdog.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/kernel/watchdog.c b/kernel/watchdog.c
index 80b56c002c7f..9c7134f7d2c4 100644
--- a/kernel/watchdog.c
+++ b/kernel/watchdog.c
@@ -455,17 +455,17 @@ static void print_cpustat(void)
 {
 	int i, group;
 	u8 tail = __this_cpu_read(cpustat_tail);
-	u64 sample_period_second = sample_period;
+	u64 sample_period_msecond = sample_period;
 
-	do_div(sample_period_second, NSEC_PER_SEC);
+	do_div(sample_period_msecond, NSEC_PER_MSEC);
 
 	/*
 	 * Outputting the "watchdog" prefix on every line is redundant and not
 	 * concise, and the original alarm information is sufficient for
 	 * positioning in logs, hence here printk() is used instead of pr_crit().
 	 */
-	printk(KERN_CRIT "CPU#%d Utilization every %llus during lockup:\n",
-	       smp_processor_id(), sample_period_second);
+	printk(KERN_CRIT "CPU#%d Utilization every %llums during lockup:\n",
+	       smp_processor_id(), sample_period_msecond);
 
 	for (i = 0; i < NUM_SAMPLE_PERIODS; i++) {
 		group = (tail + i) % NUM_SAMPLE_PERIODS;
-- 
2.43.5