Re: [PATCH v3 2/4] dt-bindings: iio: adc: add ade9000

[Marcelo Schmitt]

Hi Antoniu,

Didn't manage to a full review of the bindings as this has many features.
Though, I've noticed one small nit below.

On 08/08, Antoniu Miclaus wrote:
> Add devicetree bindings support for ade9000.
> 
> Signed-off-by: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
> ---
> changes in v3:
>  - fix $id schema URL format
>  - remove address/size-cells and channel subnodes
>  - add dready interrupt support
>  - add clock input/output support
>  - simplify device tree structure
>  .../bindings/iio/adc/adi,ade9000.yaml         | 110 ++++++++++++++++++
>  1 file changed, 110 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ade9000.yaml
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ade9000.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ade9000.yaml
> new file mode 100644
> index 000000000000..07bc49acc920
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/adi,ade9000.yaml
> @@ -0,0 +1,110 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright 2025 Analog Devices Inc.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/adc/adi,ade9000.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analog Devices ADE9000 High Performance, Polyphase Energy Metering driver
> +
> +maintainers:
> +  - Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
> +
> +description: |
> +  The ADE9000 s a highly accurate, fully integrated, multiphase energy and power
> +  quality monitoring device. Superior analog performance and a digital signal
> +  processing (DSP) core enable accurate energy monitoring over a wide dynamic
> +  range. An integrated high end reference ensures low drift over temperature
> +  with a combined drift of less than ±25 ppm/°C maximum for the entire channel
> +  including a programmable gain amplifier (PGA) and an analog-to- digital
> +  converter (ADC).
> +
> +  https://www.analog.com/media/en/technical-documentation/data-sheets/ADE9000.pdf
> +
> +$ref: /schemas/spi/spi-peripheral-props.yaml#
> +
...
> +required:
> +  - compatible
> +  - reg
> +  - reset-gpios
> +  - interrupts
> +  - interrupt-names
> +  - vdd-supply
> +
> +allOf:
> +  - $ref: /schemas/spi/spi-peripheral-props.yaml#
spi-peripheral-props is alread referenced right after the dt-binding general
description. Is it needed to also reference it here?