[PATCH v2 01/32] dt-bindings: media: add DW MIPI CSI-2 Host support

[Frank Li]

From: Eugen Hristev <eugen.hristev@xxxxxxxxxx>

Add bindings for Synopsys DesignWare MIPI CSI-2 host, which used at i.MX93
and i.MX95 platform.

Signed-off-by: Luis Oliveira <lolivei@xxxxxxxxxxxx>
Signed-off-by: Eugen Hristev <eugen.hristev@xxxxxxxxxx>
Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
---
Change in v2
- remove Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx> from mantainer.
- update ugen Hristev's s-o-b tag to align original author's email address
- remove single snps,dw-mipi-csi2-v150 compatible string
- move additionalProperties after required
---
 .../bindings/media/snps,dw-mipi-csi2-v150.yaml     | 158 +++++++++++++++++++++
 MAINTAINERS                                        |   1 +
 2 files changed, 159 insertions(+)

diff --git a/Documentation/devicetree/bindings/media/snps,dw-mipi-csi2-v150.yaml b/Documentation/devicetree/bindings/media/snps,dw-mipi-csi2-v150.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..fc1b167d6d3b142a01e2ea7f04230934260a05e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/snps,dw-mipi-csi2-v150.yaml
@@ -0,0 +1,158 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/snps,dw-mipi-csi2-v150.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare CSI-2 Host controller (csi2host)
+
+maintainers:
+  - Frank Li <Frank.Li@xxxxxxx>
+
+description:
+  CSI2HOST is used to receive image coming from an MIPI CSI-2 compatible
+  camera. It will convert the incoming CSI-2 stream into a dedicated
+  interface called the Synopsys IDI (Image Data Interface).
+  This interface is a 32-bit SoC internal only, and can be assimilated
+  with a CSI-2 interface.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - fsl,imx93-mipi-csi2
+      - const: snps,dw-mipi-csi2-v150
+
+  reg:
+    items:
+      - description: MIPI CSI-2 core register
+
+  reg-names:
+    items:
+      - const: core
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: per
+      - const: pixel
+
+  phys:
+    maxItems: 1
+    description: MIPI D-PHY
+
+  phy-names:
+    items:
+      - const: rx
+
+  resets:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port node, single endpoint describing the input port.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+            description: Endpoint connected to input device
+
+            properties:
+              bus-type:
+                const: 4
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+                items:
+                  maximum: 4
+
+              clock-lanes:
+                maxItems: 1
+
+              remote-endpoint: true
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Output port node, single endpoint describing the output port.
+
+        properties:
+          endpoint:
+            unevaluatedProperties: false
+            $ref: video-interfaces.yaml#
+            description: Endpoint connected to output device
+
+            properties:
+              bus-type:
+                const: 4
+
+              remote-endpoint: true
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    csi@3000 {
+        compatible = "fsl,imx93-mipi-csi2", "snps,dw-mipi-csi2-v150";
+        reg = <0x03000 0x1000>;
+        reg-names = "core";
+        phys = <&mipi_dphy_rx 0>;
+        phy-names = "rx";
+        resets = <&dw_rst 1>;
+        interrupts = <2>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                endpoint {
+                    bus-type = <4>; /* MIPI CSI2 D-PHY */
+                    remote-endpoint = <&camera_1>;
+                    data-lanes = <1 2>;
+                    clock-lanes = <0>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+
+                endpoint {
+                    remote-endpoint = <&idi_receiver>;
+                    bus-type = <4>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index edfcee622f74054f519336f0ea963e7c8f2f6add..385b797c1e29c71fb89a908d543cc60806aaa978 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -15193,6 +15193,7 @@ F:	Documentation/devicetree/bindings/media/fsl,imx93-parallel-csi.yaml
 F:	Documentation/devicetree/bindings/media/nxp,imx-mipi-csi2.yaml
 F:	Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml
 F:	Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
+F:	Documentation/devicetree/bindings/media/snps,dw-mipi-csi2-v150.yaml
 F:	drivers/media/platform/nxp/imx-mipi-csis.c
 F:	drivers/media/platform/nxp/imx-parallel-csi.c
 F:	drivers/media/platform/nxp/imx7-media-csi.c

-- 
2.34.1