[PATCH v2 5/5] phy: renesas: rcar-gen3-usb2: Move debug print after register value is updated

[Prabhakar]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>

Relocate the debug print in rcar_gen3_enable_vbus_ctrl() to appear after
the `val` variable is assigned and updated based on the VBUS state. This
ensures that the debug log reflects the actual register value being
written, improving debugging accuracy.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
Reviewed-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
---
v1->v2:
- Added Reviewed-by from Neil.
---
 drivers/phy/renesas/phy-rcar-gen3-usb2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
index 8caef9cb228c..7b4a6e8b7508 100644
--- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c
+++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
@@ -211,7 +211,6 @@ static void rcar_gen3_enable_vbus_ctrl(struct rcar_gen3_chan *ch, int vbus)
 	u32 vbus_ctrl_val = USB2_ADPCTRL_DRVVBUS;
 	u32 val;
 
-	dev_vdbg(ch->dev, "%s: %08x, %d\n", __func__, val, vbus);
 	if (ch->phy_data->no_adp_ctrl || ch->phy_data->vblvl_ctrl) {
 		if (ch->vbus)
 			regulator_hardware_enable(ch->vbus, vbus);
@@ -225,6 +224,7 @@ static void rcar_gen3_enable_vbus_ctrl(struct rcar_gen3_chan *ch, int vbus)
 		val |= vbus_ctrl_val;
 	else
 		val &= ~vbus_ctrl_val;
+	dev_vdbg(ch->dev, "%s: %08x, %d\n", __func__, val, vbus);
 	writel(val, usb2_base + vbus_ctrl_reg);
 }
 
-- 
2.50.1