[PATCH v3 05/10] iio: adc: ad7476: use *_cansleep GPIO APIs

[Matti Vaittinen]

The ad7476 driver supports ADCs which require a GPIO pin to be used to
start conversion. The GPIO line status seems to be always toggled from
a process context, either from the user-initiated "raw-read conversion",
or from a threaded IRQ handler. Furthermore, these ICs are connected via
SPI bus, which is usually implemented in a way that the access to the
device can sleep. The GPIO here is toggled from the same context which
is reading the results over SPI.

Thus it seems very likely these GPIOs are toggled from a context which
can sleep.

Swap the gpiod_set_value() to gpiod_set_value_cansleep() accordinlgy.

Suggested-by: Nuno Sá <noname.nuno@xxxxxxxxx>
Signed-off-by: Matti Vaittinen <mazziesaccount@xxxxxxxxx>

---
Revision history:
 v2 => v3:
 - New patch
---
 drivers/iio/adc/ad7476.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/adc/ad7476.c b/drivers/iio/adc/ad7476.c
index fc701267358e..1445f0f599d9 100644
--- a/drivers/iio/adc/ad7476.c
+++ b/drivers/iio/adc/ad7476.c
@@ -57,9 +57,9 @@ static void ad7091_convst(struct ad7476_state *st)
 	if (!st->convst_gpio)
 		return;
 
-	gpiod_set_value(st->convst_gpio, 0);
+	gpiod_set_value_cansleep(st->convst_gpio, 0);
 	udelay(1); /* CONVST pulse width: 10 ns min */
-	gpiod_set_value(st->convst_gpio, 1);
+	gpiod_set_value_cansleep(st->convst_gpio, 1);
 	udelay(1); /* Conversion time: 650 ns max */
 }
 
-- 
2.50.1

Attachment: signature.asc
Description: PGP signature