[PATCH v1 3/3] ARM: dts: aspeed: santabarbara: Adjust LED configuration
From: Fred Chen
Date: Tue Jul 29 2025 - 05:14:59 EST
Add a new power fault LED on GPIOB5 and relocate the ID LED to GPIOQ4.
The ID LED is now driven by the CPLD, allowing it to reflect multiple
system states depending on CPLD logic.
Signed-off-by: Fred Chen <fredchen.openbmc@xxxxxxxxx>
---
.../boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts
index ed30f3bf61a4..c7eb30e5baad 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts
@@ -94,7 +94,7 @@ led-0 {
};
led-1 {
- label = "fp_id_amber";
+ label = "power_fault";
default-state = "off";
gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
};
@@ -104,6 +104,12 @@ led-2 {
default-state = "off";
gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
};
+
+ led-3 {
+ label = "fp_id_amber";
+ default-state = "off";
+ gpios = <&gpio0 ASPEED_GPIO(Q, 4) GPIO_ACTIVE_HIGH>;
+ };
};
memory@80000000 {
--
2.49.0