Re: [PATCH v9 2/2] PCI: trace: Add a RAS tracepoint to monitor link speed changes

[Shuai Xue]

在 2025/7/26 15:51, Lukas Wunner 写道:
> On Fri, Jul 25, 2025 at 04:09:21PM -0500, Bjorn Helgaas wrote:
> > > @@ -319,8 +319,7 @@ int pciehp_check_link_status(struct controller *ctrl)
> > >   		return -1;
> > >   	}
> > >   
> > > -	pcie_capability_read_word(pdev, PCI_EXP_LNKSTA2, &linksta2);
> > > -	__pcie_update_link_speed(ctrl->pcie->port->subordinate, lnk_status, linksta2);
> > > +	pcie_update_link_speed(ctrl->pcie->port->subordinate, PCIE_HOTPLUG);
> >
> > It kind of bugs me that the hot-add flow reads LNKSTA three times and
> > generates both pci_hp_event LINK_UP and link_event tracepoints:
> >
> >    pciehp_handle_presence_or_link_change
> >      link_active = pciehp_check_link_active()
> >        pcie_capability_read_word(PCI_EXP_LNKSTA)
> >      if (link_active)
> >        ctrl_info(ctrl, "Slot(%s): Link Up\n")
>
> This LNKSTA read decides whether to bring up the slot.
> It can't be eliminated.
>
> >        trace_pci_hp_event(PCI_HOTPLUG_LINK_UP)
> >        pciehp_enable_slot
> >          __pciehp_enable_slot
> >            board_added
> >              pciehp_check_link_status
> >                pcie_capability_read_word(PCI_EXP_LNKSTA)
>
> This is sort of a final check whether the link is (still) active
> before commencing device enumeration.  Doesn't look like it can
> safely be eliminated either.
>
> >                pcie_update_link_speed
> >                  pcie_capability_read_word(PCI_EXP_LNKSTA)
> >                  pcie_capability_read_word(PCI_EXP_LNKSTA2)
> >                  trace_pcie_link_event(<REASON>)
>
> This third register read is introduced by the present patch and is
> indeed somewhat a step back, given that pciehp_check_link_status()
> currently deliberately calls __pcie_update_link_speed() to pass
> the already read LNKSTA value.

Hi Lukas, and Bjorn:

Thanks for the excellent technical analysis!

You're absolutely right. I introduced an unnecessary regression by
adding a third LNKSTA read when pciehp_check_link_status() already has
the LNKSTA value and was specifically designed to pass it to
__pcie_update_link_speed().

> I'm wondering if the tracepoint can be moved down to
> __pcie_update_link_speed()?

Yes, that's a much better approach. Will fix it in next version.

> > And maybe we need both a bare LINK_UP event and a link_event with all
> > the details, but again it seems a little weird to me that there are
> > two tracepoints when there's really only one event and we know all the
> > link_event information from the very first LNKSTA read.
>
> One of the reasons is that a "Link Down" event would have to
> contain dummy values for link speed etc, so it seemed cleaner
> to separate the hotplug event from the link speed event.
>
> Thanks,
>
> Lukas

I agree with Lukas and I completely agree with this separation. The two
tracepoints serve different purposes:

- pci_hp_event: Pure hotplug state changes (LINK_UP/LINK_DOWN,
  CARD_PRESENT/CARD_NOT_PRESENT)
- pcie_link_event: Actual link parameter information when meaningful
  values exist

For LINK_DOWN events, we don't have meaningful speed/width values, so
forcing them into a single tracepoint would indeed require dummy/invalid
values, making the interface confusing.

Thanks for the clear technical guidance and for catching my regression!

Best regards,
Shuai