Re: [PATCH v2 3/3] arm64: dts: qcom: sm8750: Add GPU clock & IOMMU nodes

[Krzysztof Kozlowski]

On Wed, Jul 23, 2025 at 10:38:50PM +0200, Konrad Dybcio wrote:
> From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
> 
> Add the GPU_CC and GX_CC (brand new! as far as we're concerned, this
> is simply a separate block housing the GX GDSC) nodes, required to
> power up the graphics-related hardware.
> 
> Make use of it by enabling the associated IOMMU as well. The GPU itself
> needs some more work and will be enabled later.
> 
> Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sm8750.dtsi | 63 ++++++++++++++++++++++++++++++++++++
>  1 file changed, 63 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8750.dtsi b/arch/arm64/boot/dts/qcom/sm8750.dtsi
> index 4643705021c6ca095a16d8d7cc3adac920b21e82..ca0770a34bed64183185aedde04f1bb96eebfa91 100644
> --- a/arch/arm64/boot/dts/qcom/sm8750.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8750.dtsi
> @@ -5,6 +5,7 @@
>  
>  #include <dt-bindings/clock/qcom,rpmh.h>
>  #include <dt-bindings/clock/qcom,sm8750-gcc.h>
> +#include <dt-bindings/clock/qcom,sm8750-gpucc.h>
>  #include <dt-bindings/clock/qcom,sm8750-tcsr.h>
>  #include <dt-bindings/dma/qcom-gpi.h>
>  #include <dt-bindings/gpio/gpio.h>
> @@ -3154,6 +3155,68 @@ tcsrcc: clock-controller@f204008 {
>  			#reset-cells = <1>;
>  		};
>  
> +		gxcc: clock-controller@3d64000 {

Not a clock controller based on properties below.

> +			compatible = "qcom,sm8750-gxcc";
> +			reg = <0x0 0x03d64000 0x0 0x6000>;
> +			power-domains = <&rpmhpd RPMHPD_GFX>,
> +					<&rpmhpd RPMHPD_MXC>,
> +					<&gpucc GPU_CC_CX_GDSC>;
> +			#power-domain-cells = <1>;
> +		};

Best regards,
Krzysztof