Re: [PATCH 2/4] dt-bindings: input: touchscreen: fsl,imx6ul-tsc: add fsl,glitch-threshold

[Dario Binacchi]

Hi Bough,

On Wed, Jul 23, 2025 at 4:45 AM Bough Chen <haibo.chen@xxxxxxx> wrote:
>
> > -----Original Message-----
> > From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
> > Sent: 2025年7月22日 18:36
> > To: linux-kernel@xxxxxxxxxxxxxxx
> > Cc: linux-amarula@xxxxxxxxxxxxxxxxxxxx; Dario Binacchi
> > <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>; Conor Dooley
> > <conor+dt@xxxxxxxxxx>; Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>;
> > Fabio Estevam <festevam@xxxxxxxxx>; Bough Chen <haibo.chen@xxxxxxx>;
> > Krzysztof Kozlowski <krzk+dt@xxxxxxxxxx>; Pengutronix Kernel Team
> > <kernel@xxxxxxxxxxxxxx>; Rob Herring <robh@xxxxxxxxxx>; Sascha Hauer
> > <s.hauer@xxxxxxxxxxxxxx>; Shawn Guo <shawnguo@xxxxxxxxxx>;
> > devicetree@xxxxxxxxxxxxxxx; imx@xxxxxxxxxxxxxxx;
> > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux-input@xxxxxxxxxxxxxxx
> > Subject: [PATCH 2/4] dt-bindings: input: touchscreen: fsl,imx6ul-tsc: add
> > fsl,glitch-threshold
> >
> > Add support for glitch threshold configuration. A detected signal is valid only if it
> > lasts longer than the set threshold; otherwise, it is regarded as a glitch.
> >
> > Signed-off-by: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
> > ---
> >
> >  .../input/touchscreen/fsl,imx6ul-tsc.yaml      | 18 ++++++++++++++++++
> >  1 file changed, 18 insertions(+)
> >
> > diff --git
> > a/Documentation/devicetree/bindings/input/touchscreen/fsl,imx6ul-tsc.yaml
> > b/Documentation/devicetree/bindings/input/touchscreen/fsl,imx6ul-tsc.yaml
> > index 678756ad0f92..2fee2940213f 100644
> > --- a/Documentation/devicetree/bindings/input/touchscreen/fsl,imx6ul-tsc.yaml
> > +++ b/Documentation/devicetree/bindings/input/touchscreen/fsl,imx6ul-tsc
> > +++ .yaml
> > @@ -62,6 +62,23 @@ properties:
> >      description: Number of data samples which are averaged for each read.
> >      enum: [ 1, 4, 8, 16, 32 ]
> >
> > +  fsl,glitch-threshold:
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +    default: 0
>
> Here the default should be 2 according to your third patch.

I considered the default value of the register, not the driver's.
If I'm not mistaken, the dt-bindings should be a description of the
hardware, not of the associated driver implementation.

>
> I'm okay for this patch set, let's waiting for comments about this yaml change.
>
> By the way, any real case which need to use other glitch threshod?

We recently submitted
https://lore.kernel.org/all/aGUDza5XRGDqfz5n@dragon/#t, and in this
initial contribution we removed all the custom parts that are not
supported upstream. This is
one such case. For our board, we need a de_glitch value of 1.

Thanks and regards,
Dario

>
> Regards
> Haibo Chen
>
> > +    enum: [ 0, 1, 2, 3 ]
> > +    description: |
> > +      Indicates the glitch threshold. The threshold is defined by number
> > +      of clock cycles. A detect signal is only valid if it is exist longer
> > +      than threshold; otherwise, it is regarded as a glitch.
> > +      0: Normal function: 8191 clock cycles
> > +         Low power mode: 9 clock cycles
> > +      1: Normal function: 4095 clock cycles
> > +         Low power mode: 7 clock cycles
> > +      2: Normal function: 2047 clock cycles
> > +         Low power mode: 5 clock cycles
> > +      3: Normal function: 1023 clock cycles
> > +         Low power mode: 3 clock cycles
> > +
> >  required:
> >    - compatible
> >    - reg
> > @@ -94,4 +111,5 @@ examples:
> >          measure-delay-time = <0xfff>;
> >          pre-charge-time = <0xffff>;
> >          touchscreen-average-samples = <32>;
> > +        fsl,glitch-threshold = <2>;
> >      };
> > --
> > 2.43.0
>


-- 

Dario Binacchi

Senior Embedded Linux Developer

dario.binacchi@xxxxxxxxxxxxxxxxxxxx

__________________________________


Amarula Solutions SRL

Via Le Canevare 30, 31100 Treviso, Veneto, IT

T. +39 042 243 5310
info@xxxxxxxxxxxxxxxxxxxx

www.amarulasolutions.com