Re: [PATCH v4 2/2] arm64: dts: qcom: qcs615-ride: add WiFi/BT nodes

[Dmitry Baryshkov]

On Mon, Jul 07, 2025 at 10:51:06AM +0800, Yu Zhang(Yuriy) wrote:
> Add a node for the PMU module of the WCN6855 present on the qcs615 ride
> board. Assign its LDO power outputs to the existing WiFi/BT module.


What is "existing WiFI/BT module"? There is no module in the DT. Not to
mention that PMU is a part of the WCN6855.

> 
> Signed-off-by: Yu Zhang(Yuriy) <yu.zhang@xxxxxxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/qcs615-ride.dts | 135 +++++++++++++++++++++++++++++++
>  1 file changed, 135 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/qcs615-ride.dts b/arch/arm64/boot/dts/qcom/qcs615-ride.dts
> index 011f8ae077c256f079ce1b07720374a9bf721488..2df8e7e3c1d3b6d6353a6753b8387c7411edd927 100644
> --- a/arch/arm64/boot/dts/qcom/qcs615-ride.dts
> +++ b/arch/arm64/boot/dts/qcom/qcs615-ride.dts
> @@ -18,6 +18,7 @@ aliases {
>  		mmc0 = &sdhc_1;
>  		mmc1 = &sdhc_2;
>  		serial0 = &uart0;
> +		serial1 = &uart7;
>  	};
>  
>  	chosen {
> @@ -47,6 +48,85 @@ regulator-usb2-vbus {
>  		enable-active-high;
>  		regulator-always-on;
>  	};
> +
> +	vreg_conn_1p8: vreg_conn_1p8 {

No improvement. Please try again.

> +		compatible = "regulator-fixed";
> +		regulator-name = "vreg_conn_1p8";
> +		startup-delay-us = <4000>;
> +		enable-active-high;
> +		gpio = <&pm8150_gpios 1 GPIO_ACTIVE_HIGH>;
> +	};
> +
> +	vreg_conn_pa: vreg_conn_pa {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vreg_conn_pa";
> +		startup-delay-us = <4000>;
> +		enable-active-high;
> +		gpio = <&pm8150_gpios 6 GPIO_ACTIVE_HIGH>;
> +	};
> +

-- 
With best wishes
Dmitry