Re: [PATCH v4 0/4] Add Dell Inspiron 7441 / Latitude 7455 (X1E-80-100)

[Bryan O'Donoghue]

On 18/07/2025 16:34, Bryan O'Donoghue wrote:
> On 18/07/2025 16:33, Bryan O'Donoghue wrote:
> > On 16/07/2025 11:53, Bryan O'Donoghue wrote:
> > > On 16/07/2025 01:26, Val Packett wrote:
> > > > Since v3[1]:
> > > >
> > > > - Applied R-b tags
> > > > - Skipping the eDP panel ID patch now since it's been applied
> > > > - Fixed the last remaining '-names before -0' order issue
> > > > - Changed usb_mp: keep the unused PHYs enabled in the DT
> > > >    (to let them go to sleep), like how it is done for the XPS
> > > >
> > > > [1]: https://lore.kernel.org/all/20250706205723.9790-2- 
> > > > val@xxxxxxxxxxxx/
> > > >
> > > > Bryan O'Donoghue (2):
> > > >    dt-bindings: arm: qcom: Add Dell Inspiron 14 Plus 7441
> > > >    arm64: dts: qcom: Add support for Dell Inspiron 7441 / Latitude 7455
> > > >
> > > > Val Packett (2):
> > > >    dt-bindings: arm: qcom: Add Dell Latitude 7455
> > > >    firmware: qcom: scm: Allow QSEECOM on Dell Inspiron 7441 / Latitude
> > > >      7455
> > > >
> > > >   .../devicetree/bindings/arm/qcom.yaml         |    2 +
> > > >   arch/arm64/boot/dts/qcom/Makefile             |    4 +
> > > >   arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi   | 1666 +++++++++++++ 
> > > > ++++
> > > >   .../x1e80100-dell-inspiron-14-plus-7441.dts   |   52 +
> > > >   .../dts/qcom/x1e80100-dell-latitude-7455.dts  |   53 +
> > > >   drivers/firmware/qcom/qcom_scm.c              |    2 +
> > > >   6 files changed, 1779 insertions(+)
> > > >   create mode 100644 arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi
> > > >   create mode 100644 arch/arm64/boot/dts/qcom/x1e80100-dell- 
> > > > inspiron-14-plus-7441.dts
> > > >   create mode 100644 arch/arm64/boot/dts/qcom/x1e80100-dell- 
> > > > latitude-7455.dts
> > >
> > > Just tested on the 14p this updated version seems to work just about 
> > > fine - or no worse than previous.
> > >
> > > Tested-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
> >
> > Ah I was booting my old dts with the spelling mistake "inspir I on" 
> > booting the insprion.dtb here is a no-boot for me.
> >
> > Please hold off on applying this, until its root-caused.
> >
> > ---
> > bod
>
> [sic] inspiron.dtb

Ah no it is OK to boot.

For some reason my encrypted disk prompt is a blank screen with this dts 
but other than that it appears to work the same.

No reason to hold it up.

---
bod