[PATCH v2 3/4] arm64: dts: qcom: sm8250: stop using SoC-specific genpd indices

From: Dmitry Baryshkov
Date: Fri Jul 18 2025 - 11:40:32 EST

Next message: Akhilesh Patil: "[PATCH] drivers: tee: improve sysfs interface by using sysfs_emit()"
Previous message: Ricardo Ribalda: "[PATCH v5 4/5] media: uvcvideo: Make gpio_unit entity-less"
In reply to: Bjorn Andersson: "Re: [PATCH v2 2/4] arm64: dts: qcom: sm8150: use correct PD for DisplayPort controller"
Next in thread: Dmitry Baryshkov: "[PATCH v2 1/4] arm64: dts: qcom: sa8775p: fix RPMh power domain indices"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

The SM8250 has switched to RPMHPD_* indices for RPMh power domains,
however commit 86a9264b6c56 ("arm64: dts: qcom: sm8250: Add
interconnects and power-domains to QUPs") brought some more old-style
indices. Convert all of them to use common RPMh PD indices.

Fixes: 86a9264b6c56 ("arm64: dts: qcom: sm8250: Add interconnects and power-domains to QUPs")
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8250.dtsi | 42 ++++++++++++++++++------------------
1 file changed, 21 insertions(+), 21 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index b0197602c677d49f7833f31d71f72436499bfe84..244339cfbed5c32708c282de18f5655535e2ff45 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -1030,7 +1030,7 @@ i2c14: i2c@880000 {
dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
<&gpi_dma2 1 0 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1075,7 +1075,7 @@ i2c15: i2c@884000 {
dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
<&gpi_dma2 1 1 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1120,7 +1120,7 @@ i2c16: i2c@888000 {
dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
<&gpi_dma2 1 2 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1165,7 +1165,7 @@ i2c17: i2c@88c000 {
dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
<&gpi_dma2 1 3 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1227,7 +1227,7 @@ i2c18: i2c@890000 {
dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
<&gpi_dma2 1 4 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1289,7 +1289,7 @@ i2c19: i2c@894000 {
dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
<&gpi_dma2 1 5 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1370,7 +1370,7 @@ i2c0: i2c@980000 {
dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
<&gpi_dma0 1 0 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1415,7 +1415,7 @@ i2c1: i2c@984000 {
dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
<&gpi_dma0 1 1 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1460,7 +1460,7 @@ i2c2: i2c@988000 {
dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
<&gpi_dma0 1 2 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1522,7 +1522,7 @@ i2c3: i2c@98c000 {
dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
<&gpi_dma0 1 3 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1567,7 +1567,7 @@ i2c4: i2c@990000 {
dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
<&gpi_dma0 1 4 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1612,7 +1612,7 @@ i2c5: i2c@994000 {
dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
<&gpi_dma0 1 5 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1657,7 +1657,7 @@ i2c6: i2c@998000 {
dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
<&gpi_dma0 1 6 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1719,7 +1719,7 @@ i2c7: i2c@99c000 {
dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
<&gpi_dma0 1 7 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1797,7 +1797,7 @@ i2c8: i2c@a80000 {
dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
<&gpi_dma1 1 0 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1842,7 +1842,7 @@ i2c9: i2c@a84000 {
dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
<&gpi_dma1 1 1 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1887,7 +1887,7 @@ i2c10: i2c@a88000 {
dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
<&gpi_dma1 1 2 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1932,7 +1932,7 @@ i2c11: i2c@a8c000 {
dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
<&gpi_dma1 1 3 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1977,7 +1977,7 @@ i2c12: i2c@a90000 {
dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
<&gpi_dma1 1 4 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -2039,7 +2039,7 @@ i2c13: i2c@a94000 {
dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
<&gpi_dma1 1 5 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -4789,7 +4789,7 @@ mdss_dp: displayport-controller@ae90000 {
#sound-dai-cells = <0>;

operating-points-v2 = <&dp_opp_table>;
- power-domains = <&rpmhpd SM8250_MMCX>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;

status = "disabled";

--
2.39.5

Next message: Akhilesh Patil: "[PATCH] drivers: tee: improve sysfs interface by using sysfs_emit()"
Previous message: Ricardo Ribalda: "[PATCH v5 4/5] media: uvcvideo: Make gpio_unit entity-less"
In reply to: Bjorn Andersson: "Re: [PATCH v2 2/4] arm64: dts: qcom: sm8150: use correct PD for DisplayPort controller"
Next in thread: Dmitry Baryshkov: "[PATCH v2 1/4] arm64: dts: qcom: sa8775p: fix RPMh power domain indices"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]