Re: [PATCH v4 1/2] dt-bindings: media: i2c: Add ov2735 sensor

[Hardevsinh Palaniya]

Hi Krzysztof

> From: Himanshu Bhavani <himanshu.bhavani@xxxxxxxxxxxxxxxxx>
> 
> Add bindings for Omnivision OV2735 sensor.
> 
> Signed-off-by: Himanshu Bhavani <himanshu.bhavani@xxxxxxxxxxxxxxxxx>
> Signed-off-by: Hardevsinh Palaniya <hardevsinh.palaniya@xxxxxxxxxxxxxxxxx>

I haven't added your Reviewed-by tag yet, as I made some modifications to the DT bindings.

Could you please review the updated changes?

Best Regards,
Hardev

> ---
>  .../bindings/media/i2c/ovti,ov2735.yaml       | 109 ++++++++++++++++++
>  1 file changed, 109 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov2735.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov2735.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov2735.yaml
> new file mode 100644
> index 000000000000..9236829cc00d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov2735.yaml
> @@ -0,0 +1,109 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/i2c/ovti,ov2735.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: OmniVision OV2735 Image Sensor
> +
> +maintainers:
> +  - Himanshu Bhavani <himanshu.bhavani@xxxxxxxxxxxxxxxxx>
> +
> +description:
> +  The OmniVision OV2735 is a 2MP (1920x1080) color CMOS image sensor controlled
> +  through an I2C-compatible SCCB bus. it outputs RAW10 format and uses a 1/2.7"
> +  optical format.
> +
> +properties:
> +  compatible:
> +    const: ovti,ov2735
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: XVCLK clock
> +
> +  avdd-supply:
> +    description: Analog Domain Power Supply
> +
> +  dovdd-supply:
> +    description: I/O Domain Power Supply
> +
> +  dvdd-supply:
> +    description: Digital Domain Power Supply
> +
> +  reset-gpios:
> +    maxItems: 1
> +    description: Reset Pin GPIO Control (active low)
> +
> +  enable-gpios:
> +    maxItems: 1
> +    description:
> +      Active-low enable pin. Labeled as 'PWDN' in the datasheet, but acts as
> +      an enable signal. During power rail ramp-up, the device remains powered
> +      down. Once power rails are stable, pulling this pin low powers on the
> +      device.
> +
> +  port:
> +    description: MIPI CSI-2 transmitter port
> +    $ref: /schemas/graph.yaml#/$defs/port-base
> +    additionalProperties: false
> +
> +    properties:
> +      endpoint:
> +        $ref: /schemas/media/video-interfaces.yaml#
> +        unevaluatedProperties: false
> +
> +        properties:
> +          data-lanes:
> +            items:
> +              - const: 1
> +              - const: 2
> +          link-frequencies: true
> +
> +        required:
> +          - data-lanes
> +          - link-frequencies
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - avdd-supply
> +  - dovdd-supply
> +  - dvdd-supply
> +  - port
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        camera-sensor@3c {
> +            compatible = "ovti,ov2735";
> +            reg = <0x3c>;
> +            clocks = <&ov2735_clk>;
> +
> +            avdd-supply = <&ov2735_avdd>;
> +            dovdd-supply = <&ov2735_dovdd>;
> +            dvdd-supply = <&ov2735_dvdd>;
> +
> +            reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
> +            enable-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
> +
> +            port {
> +                cam_out: endpoint {
> +                    remote-endpoint = <&mipi_in_cam>;
> +                    data-lanes = <1 2>;
> +                    link-frequencies = /bits/ 64 <420000000>;
> +                };
> +            };
> +        };
> +    };
> --
> 2.34.1