Re: [PATCH v4 0/4] Add Dell Inspiron 7441 / Latitude 7455 (X1E-80-100)

[Bryan O'Donoghue]

On 16/07/2025 01:26, Val Packett wrote:
> Since v3[1]:
>
> - Applied R-b tags
> - Skipping the eDP panel ID patch now since it's been applied
> - Fixed the last remaining '-names before -0' order issue
> - Changed usb_mp: keep the unused PHYs enabled in the DT
>    (to let them go to sleep), like how it is done for the XPS
>
> [1]: https://lore.kernel.org/all/20250706205723.9790-2-val@xxxxxxxxxxxx/
>
> Bryan O'Donoghue (2):
>    dt-bindings: arm: qcom: Add Dell Inspiron 14 Plus 7441
>    arm64: dts: qcom: Add support for Dell Inspiron 7441 / Latitude 7455
>
> Val Packett (2):
>    dt-bindings: arm: qcom: Add Dell Latitude 7455
>    firmware: qcom: scm: Allow QSEECOM on Dell Inspiron 7441 / Latitude
>      7455
>
>   .../devicetree/bindings/arm/qcom.yaml         |    2 +
>   arch/arm64/boot/dts/qcom/Makefile             |    4 +
>   arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi   | 1666 +++++++++++++++++
>   .../x1e80100-dell-inspiron-14-plus-7441.dts   |   52 +
>   .../dts/qcom/x1e80100-dell-latitude-7455.dts  |   53 +
>   drivers/firmware/qcom/qcom_scm.c              |    2 +
>   6 files changed, 1779 insertions(+)
>   create mode 100644 arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi
>   create mode 100644 arch/arm64/boot/dts/qcom/x1e80100-dell-inspiron-14-plus-7441.dts
>   create mode 100644 arch/arm64/boot/dts/qcom/x1e80100-dell-latitude-7455.dts

Just tested on the 14p this updated version seems to work just about 
fine - or no worse than previous.

Tested-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>