Re: [PATCH v5 4/4] arm64: dts: ti: Add support for AM62D2-EVM

[Vignesh Raghavendra]

On 27/06/25 17:27, Paresh Bhagat wrote:
> +&main_pmx0 {
> +	main_uart0_pins_default: main-uart0-default-pins {
> +		pinctrl-single,pins = <
> +			AM62DX_IOPAD(0x01c8, PIN_INPUT, 0) /* (E14) UART0_RXD */
> +			AM62DX_IOPAD(0x01cc, PIN_OUTPUT, 0) /* (D15) UART0_TXD */
> +		>;
> +		bootph-all;
> +	};
> +
> +	main_i2c0_pins_default: main-i2c0-default-pins {
> +		pinctrl-single,pins = <
> +			AM62DX_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (D17) I2C0_SCL */
> +			AM62DX_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (E16) I2C0_SDA */
> +		>;
> +		bootph-all;
> +	};
> +
> +	main_i2c1_pins_default: main-i2c1-default-pins {
> +		pinctrl-single,pins = <
> +			AM62DX_IOPAD(0x01e8, PIN_INPUT_PULLUP, 0) /* (C17) I2C1_SCL */
> +			AM62DX_IOPAD(0x01ec, PIN_INPUT_PULLUP, 0) /* (E17) I2C1_SDA */
> +		>;
> +		bootph-all;
> +	};
> +
> +	main_i2c2_pins_default: main-i2c2-default-pins {
> +		pinctrl-single,pins = <
> +			AM62DX_IOPAD(0x00b0, PIN_INPUT_PULLUP, 1) /* (M22) GPMC0_CSn2.I2C2_SCL */
> +			AM62DX_IOPAD(0x00b4, PIN_INPUT_PULLUP, 1) /* (M20) GPMC0_CSn3.I2C2_SDA */
> +		>;
> +	};
> +
> +	main_mmc0_pins_default: main-mmc0-default-pins {
> +		pinctrl-single,pins = <
> +			AM62DX_IOPAD(0x0220, PIN_INPUT_PULLUP, 0) /* (Y6) MMC0_CMD */
> +			AM62DX_IOPAD(0x0218, PIN_OUTPUT, 0) /* (AB7) MMC0_CLK */
> +			AM62DX_IOPAD(0x0214, PIN_INPUT_PULLUP, 0) /* (AA6) MMC0_DAT0 */
> +			AM62DX_IOPAD(0x0210, PIN_INPUT_PULLUP, 0) /* (AB6) MMC0_DAT1 */
> +			AM62DX_IOPAD(0x020c, PIN_INPUT_PULLUP, 0) /* (Y7) MMC0_DAT2 */
> +			AM62DX_IOPAD(0x0208, PIN_INPUT_PULLUP, 0) /* (AA7) MMC0_DAT3 */
> +			AM62DX_IOPAD(0x0204, PIN_INPUT_PULLUP, 0) /* (Y8) MMC0_DAT4 */
> +			AM62DX_IOPAD(0x0200, PIN_INPUT_PULLUP, 0) /* (W7) MMC0_DAT5 */
> +			AM62DX_IOPAD(0x01fc, PIN_INPUT_PULLUP, 0) /* (W9) MMC0_DAT6 */
> +			AM62DX_IOPAD(0x01f8, PIN_INPUT_PULLUP, 0) /* (AB8) MMC0_DAT7 */
> +		>;
> +		bootph-all;
> +	};
> +
> +	main_mmc1_pins_default: main-mmc1-default-pins {
> +		pinctrl-single,pins = <
> +			AM62DX_IOPAD(0x023c, PIN_INPUT, 0) /* (C21) MMC1_CMD */
> +			AM62DX_IOPAD(0x0234, PIN_OUTPUT, 0) /* (E22) MMC1_CLK */
> +			AM62DX_IOPAD(0x0230, PIN_INPUT, 0) /* (B22) MMC1_DAT0 */
> +			AM62DX_IOPAD(0x022c, PIN_INPUT_PULLUP, 0) /* (D21) MMC1_DAT1 */
> +			AM62DX_IOPAD(0x0228, PIN_INPUT_PULLUP, 0) /* (C22) MMC1_DAT2 */
> +			AM62DX_IOPAD(0x0224, PIN_INPUT_PULLUP, 0) /* (D22) MMC1_DAT3 */

Double check PULLUP here.. There seems to be external PULLUPs on the
board. Do you still need internal pulls?

> +			AM62DX_IOPAD(0x0240, PIN_INPUT, 0) /* (E18) MMC1_SDCD */

> +			AM62DX_IOPAD(0x0244, PIN_INPUT, 0) /* (D18) MMC1_SDWP */

This pin isn't needed/connected right?

> +		>;
> +		bootph-all;
> +	};
> +
> +	main_mdio0_pins_default: main-mdio0-default-pins {
> +		pinctrl-single,pins = <
> +			AM62DX_IOPAD(0x160, PIN_OUTPUT, 0) /* (V12) MDIO0_MDC */
> +			AM62DX_IOPAD(0x15c, PIN_INPUT, 0) /* (V13) MDIO0_MDIO */
> +		>;
> +		bootph-all;
> +	};
> +
> +	main_rgmii1_pins_default: main-rgmii1-default-pins {
> +		pinctrl-single,pins = <
> +			AM62DX_IOPAD(0x14c, PIN_INPUT, 0) /* (AB16) RGMII1_RD0 */
> +			AM62DX_IOPAD(0x150, PIN_INPUT, 0) /* (V15) RGMII1_RD1 */
> +			AM62DX_IOPAD(0x154, PIN_INPUT, 0) /* (W15) RGMII1_RD2 */
> +			AM62DX_IOPAD(0x158, PIN_INPUT, 0) /* (V14) RGMII1_RD3 */
> +			AM62DX_IOPAD(0x148, PIN_INPUT, 0) /* (AA16) RGMII1_RXC */
> +			AM62DX_IOPAD(0x144, PIN_INPUT, 0) /* (AA15) RGMII1_RX_CTL */
> +			AM62DX_IOPAD(0x134, PIN_INPUT, 0) /* (Y17) RGMII1_TD0 */
> +			AM62DX_IOPAD(0x138, PIN_INPUT, 0) /* (V16) RGMII1_TD1 */
> +			AM62DX_IOPAD(0x13c, PIN_INPUT, 0) /* (Y16) RGMII1_TD2 */
> +			AM62DX_IOPAD(0x140, PIN_INPUT, 0) /* (AA17) RGMII1_TD3 */
> +			AM62DX_IOPAD(0x0130, PIN_OUTPUT, 0) /* (AB17) RGMII1_TXC */
> +			AM62DX_IOPAD(0x012c, PIN_OUTPUT, 0) /* (W16) RGMII1_TX_CTL */
> +		>;
> +		bootph-all;
> +	};
> +
> +	main_rgmii2_pins_default: main-rgmii2-default-pins {
> +		pinctrl-single,pins = <
> +			AM62DX_IOPAD(0x0184, PIN_INPUT, 0) /* (AA21) RGMII2_RD0 */
> +			AM62DX_IOPAD(0x0188, PIN_INPUT, 0) /* (Y20) RGMII2_RD1 */
> +			AM62DX_IOPAD(0x018c, PIN_INPUT, 0) /* (AB21) RGMII2_RD2 */
> +			AM62DX_IOPAD(0x0190, PIN_INPUT, 0) /* (AB20) RGMII2_RD3 */
> +			AM62DX_IOPAD(0x0180, PIN_INPUT, 0) /* (AA20) RGMII2_RXC */
> +			AM62DX_IOPAD(0x017c, PIN_INPUT, 0) /* (W18) RGMII2_RX_CTL */
> +			AM62DX_IOPAD(0x016c, PIN_INPUT, 0) /* (AA19) RGMII2_TD0 */
> +			AM62DX_IOPAD(0x0170, PIN_INPUT, 0) /* (Y18) RGMII2_TD1 */
> +			AM62DX_IOPAD(0x0174, PIN_INPUT, 0) /* (AA18) RGMII2_TD2 */
> +			AM62DX_IOPAD(0x0178, PIN_INPUT, 0) /* (W17) RGMII2_TD3 */
> +			AM62DX_IOPAD(0x0168, PIN_OUTPUT, 0) /* (AB19) RGMII2_TXC */
> +			AM62DX_IOPAD(0x0164, PIN_OUTPUT, 0) /* (Y19) RGMII2_TX_CTL */
> +		>;
> +		bootph-all;
> +	};
> +
> +	main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-default-pins {
> +		pinctrl-single,pins = <
> +			AM62DX_IOPAD(0x01d4, PIN_INPUT, 7) /* (C15) UART0_RTSn.GPIO1_23 */
> +		>;
> +	};
> +
> +	vddshv_sdio_pins_default: vddshv-sdio-default-pins {
> +		pinctrl-single,pins = <
> +			AM62DX_IOPAD(0x1F4, PIN_OUTPUT, 7) /* (M19) GPMC0_CLK.GPIO1_31 */

					^^^ use lower case hexadecimals

> +		>;
> +		bootph-all;
> +	};
> +};
> +

-- 
Regards
Vignesh
https://ti.com/opensource