[PATCH 20/26] clk: amlogic: drop CLK_SET_RATE_PARENT from peripheral clocks

[Jerome Brunet]

On Amlogic SoCs, the rate of a peripheral clock should not be changed,
let alone the rate of the parent PLL.

These clocks are meant to be used as provided by the parent PLL. Changing
the rate would be dangerous and would likely break a lot of devices running
from the same PLL.

Don't propagate any rate change request that may come from these clocks and
drop the corresponding flag.

Signed-off-by: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
---
 drivers/clk/meson/meson-clkc-utils.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/meson/meson-clkc-utils.h b/drivers/clk/meson/meson-clkc-utils.h
index 0c228a6723bb2bddc0b9a4f92515f05850a5613a..3e1fb7efe6da1f5d8e55993541d12d40464a47f5 100644
--- a/drivers/clk/meson/meson-clkc-utils.h
+++ b/drivers/clk/meson/meson-clkc-utils.h
@@ -38,7 +38,7 @@ struct clk_regmap _name = {						\
 		.ops = _ops,						\
 		.parent_hws = (const struct clk_hw *[]) { _pname },	\
 		.num_parents = 1,					\
-		.flags = (CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED),	\
+		.flags = CLK_IGNORE_UNUSED,				\
 	},								\
 }
 

-- 
2.47.2