Re: [PATCH] iio: st_lsm6dsx: Replace scnprintf with sysfs_emit

From: akshay bansod
Date: Wed Jul 02 2025 - 10:58:14 EST


On Wednesday, 2 July 2025 8:25 pm +0530 David Lechner wrote:
> On 7/2/25 8:58 AM, Akshay Bansod wrote:
> > Update the sysfs interface for sampling frequency and scale attributes.
> > Replace `scnprintf()` with `sysfs_emit_at()` which is PAGE_SIZE-aware
> > and recommended for use in sysfs.
> >
> > Signed-off-by: Akshay Bansod <akbansd@xxxxxxxxx>
> > ---
> >
> > Testing:
> > - Built the driver (`st_lsm6dsx_i2c`) as a module.
> > - Tested using `i2c-stub` to mock the device.
> > - Verified that reading sysfs attributes like `sampling_frequency_available`
> > works correctly and shows no change in functionality.
>
> Nice to see it was actually tested. :-)
>
:-)
> >
> > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 4 ++--
> > 1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> > index c65ad4982..1cef10919 100644
> > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> > @@ -2035,7 +2035,7 @@ st_lsm6dsx_sysfs_sampling_frequency_avail(struct device *dev,
> >
> > odr_table = &sensor->hw->settings->odr_table[sensor->id];
> > for (i = 0; i < odr_table->odr_len; i++)
> > - len += scnprintf(buf + len, PAGE_SIZE - len, "%d.%03d ",
> > + len += sysfs_emit_at(buf, len, "%d.%03d ",
> > odr_table->odr_avl[i].milli_hz / 1000,
> > odr_table->odr_avl[i].milli_hz % 1000);
>
> Let's keep checkpatch happy and change the indent of the wrapped lines to
> line up with ( since the ( moved.
>
noted. I wasn't aware of that.
> > buf[len - 1] = '\n';
> > @@ -2054,7 +2054,7 @@ static ssize_t st_lsm6dsx_sysfs_scale_avail(struct device *dev,
> >
> > fs_table = &hw->settings->fs_table[sensor->id];
> > for (i = 0; i < fs_table->fs_len; i++)
> > - len += scnprintf(buf + len, PAGE_SIZE - len, "0.%09u ",
> > + len += sysfs_emit_at(buf, len, "0.%09u ",
> > fs_table->fs_avl[i].gain);
>
> ditto
>
noted.
> > buf[len - 1] = '\n';
> >
>
>

Thanks for the review. I'll revise the patch.

Regards,
Akshay