[PATCH net v1 3/4] net: phy: smsc: Fix link failure in forced mode with Auto-MDIX
From: Oleksij Rempel
Date: Tue Jul 01 2025 - 08:22:27 EST
Force a fixed MDI-X mode when auto-negotiation is disabled to prevent
link instability.
When forcing the link speed and duplex on a LAN9500 PHY (e.g., with
`ethtool -s eth0 autoneg off ...`) while leaving MDI-X control in auto
mode, the PHY fails to establish a stable link. This occurs because the
PHY's Auto-MDIX algorithm is not designed to operate when
auto-negotiation is disabled. In this state, the PHY continuously
toggles the TX/RX signal pairs, which prevents the link partner from
synchronizing.
This patch resolves the issue by detecting when auto-negotiation is
disabled. If the MDI-X control mode is set to 'auto', the driver now
forces a specific, stable mode (ETH_TP_MDI) to prevent the pair
toggling. This choice of a fixed MDI mode mirrors the behavior the
hardware would exhibit if the AUTOMDIX_EN strap were configured for a
fixed MDI connection.
Fixes: 05b35e7eb9a1 ("smsc95xx: add phylib support")
Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
Cc: Andre Edich <andre.edich@xxxxxxxxxxxxx>
---
drivers/net/phy/smsc.c | 25 ++++++++++++++++++++++---
1 file changed, 22 insertions(+), 3 deletions(-)
diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c
index ad9a3d91bb8a..b6489da5cfcd 100644
--- a/drivers/net/phy/smsc.c
+++ b/drivers/net/phy/smsc.c
@@ -155,10 +155,29 @@ static int smsc_phy_reset(struct phy_device *phydev)
static int lan87xx_config_aneg(struct phy_device *phydev)
{
- int rc;
+ u8 mdix_ctrl;
int val;
+ int rc;
+
+ /* When auto-negotiation is disabled (forced mode), the PHY's
+ * Auto-MDIX will continue toggling the TX/RX pairs.
+ *
+ * To establish a stable link, we must select a fixed MDI mode.
+ * If the user has not specified a fixed MDI mode (i.e., mdix_ctrl is
+ * 'auto'), we default to ETH_TP_MDI. This choice of a ETH_TP_MDI mode
+ * mirrors the behavior the hardware would exhibit if the AUTOMDIX_EN
+ * strap were configured for a fixed MDI connection.
+ */
+ if (phydev->autoneg == AUTONEG_DISABLE) {
+ if (phydev->mdix_ctrl == ETH_TP_MDI_AUTO)
+ mdix_ctrl = ETH_TP_MDI;
+ else
+ mdix_ctrl = phydev->mdix_ctrl;
+ } else {
+ mdix_ctrl = phydev->mdix_ctrl;
+ }
- switch (phydev->mdix_ctrl) {
+ switch (mdix_ctrl) {
case ETH_TP_MDI:
val = SPECIAL_CTRL_STS_OVRRD_AMDIX_;
break;
@@ -184,7 +203,7 @@ static int lan87xx_config_aneg(struct phy_device *phydev)
rc |= val;
phy_write(phydev, SPECIAL_CTRL_STS, rc);
- phydev->mdix = phydev->mdix_ctrl;
+ phydev->mdix = mdix_ctrl;
return genphy_config_aneg(phydev);
}
--
2.39.5