Re: [PATCH v2 5/8] dt-bindings: clock: qcom: Add NSS clock controller for IPQ5424 SoC

[Krzysztof Kozlowski]

On Fri, Jun 27, 2025 at 08:09:21PM +0800, Luo Jie wrote:
> NSS clock controller provides the clocks and resets to the networking
> blocks such as PPE (Packet Process Engine) and UNIPHY (PCS) on IPQ5424
> devices.
> 
> Add the compatible "qcom,ipq5424-nsscc" support based on the current
> IPQ9574 NSS clock controller DT binding file. ICC clocks are always
> provided by the NSS clock controller of IPQ9574 and IPQ5424, so add
> interconnect-cells as required DT property.
> 
> Also add master/slave ids for IPQ5424 networking interfaces, which is
> used by nss-ipq5424 driver for providing interconnect services using
> icc-clk framework.
> 
> Signed-off-by: Luo Jie <quic_luoj@xxxxxxxxxxx>
> ---
>  .../bindings/clock/qcom,ipq9574-nsscc.yaml         | 70 +++++++++++++++++++---
>  include/dt-bindings/clock/qcom,ipq5424-nsscc.h     | 65 ++++++++++++++++++++
>  include/dt-bindings/interconnect/qcom,ipq5424.h    | 13 ++++
>  include/dt-bindings/reset/qcom,ipq5424-nsscc.h     | 46 ++++++++++++++
>  4 files changed, 186 insertions(+), 8 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/clock/qcom,ipq9574-nsscc.yaml b/Documentation/devicetree/bindings/clock/qcom,ipq9574-nsscc.yaml
> index 17252b6ea3be..0029a148a397 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,ipq9574-nsscc.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,ipq9574-nsscc.yaml
> @@ -4,7 +4,7 @@
>  $id: http://devicetree.org/schemas/clock/qcom,ipq9574-nsscc.yaml#
>  $schema: http://devicetree.org/meta-schemas/core.yaml#
>  
> -title: Qualcomm Networking Sub System Clock & Reset Controller on IPQ9574
> +title: Qualcomm Networking Sub System Clock & Reset Controller on IPQ9574 and IPQ5424
>  
>  maintainers:
>    - Bjorn Andersson <andersson@xxxxxxxxxx>
> @@ -12,21 +12,29 @@ maintainers:
>  
>  description: |
>    Qualcomm networking sub system clock control module provides the clocks,
> -  resets on IPQ9574
> +  resets on IPQ9574 and IPQ5424
>  
> -  See also::
> +  See also:
> +    include/dt-bindings/clock/qcom,ipq5424-nsscc.h
>      include/dt-bindings/clock/qcom,ipq9574-nsscc.h
> +    include/dt-bindings/reset/qcom,ipq5424-nsscc.h
>      include/dt-bindings/reset/qcom,ipq9574-nsscc.h
>  
>  properties:
>    compatible:
> -    const: qcom,ipq9574-nsscc
> +    enum:
> +      - qcom,ipq5424-nsscc
> +      - qcom,ipq9574-nsscc
>  
>    clocks:
>      items:
>        - description: Board XO source
> -      - description: CMN_PLL NSS 1200MHz (Bias PLL cc) clock source
> -      - description: CMN_PLL PPE 353MHz (Bias PLL ubi nc) clock source
> +      - description: CMN_PLL NSS (Bias PLL cc) clock source. This clock rate
> +          can vary for different IPQ SoCs. For example, it is 1200 MHz on the
> +          IPQ9574 and 300 MHz on the IPQ5424.
> +      - description: CMN_PLL PPE (Bias PLL ubi nc) clock source. The clock
> +          rate can vary for different IPQ SoCs. For example, it is 353 MHz
> +          on the IPQ9574 and 375 MHz on the IPQ5424
>        - description: GCC GPLL0 OUT AUX clock source
>        - description: Uniphy0 NSS Rx clock source
>        - description: Uniphy0 NSS Tx clock source
> @@ -42,8 +50,12 @@ properties:
>    clock-names:
>      items:
>        - const: xo
> -      - const: nss_1200
> -      - const: ppe_353
> +      - enum:
> +          - nss_1200
> +          - nss

No, that's the same clock.


> +      - enum:
> +          - ppe_353
> +          - ppe

No, that's the same clock!

The frequencies are not part of input pin. Input pin tells you this is
clock for PPE, not this is clock for PPE 353 and another for PPE xxx.

Best regards,
Krzysztof