[PATCH v3 4/5] arm64: dts: allwinner: a523: Add UART1 pins

[Chen-Yu Tsai]

From: Chen-Yu Tsai <wens@xxxxxxxx>

UART1 is normally used to connect to the Bluetooth side of a Broadcom
WiFi+BT combo chip. The connection uses 4 pins.

Add pinmux nodes for UART1, one for the RX/TX pins, and one for the
RTS/CTS pins.

Reviewed-by: Andre Przywara <andre.przywara@xxxxxxx>
Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>
---
 arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
index 4839411e51cf..cf0bc39aab04 100644
--- a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
@@ -168,6 +168,20 @@ uart0_pb_pins: uart0-pb-pins {
 				allwinner,pinmux = <2>;
 				function = "uart0";
 			};
+
+			/omit-if-no-ref/
+			uart1_pins: uart1-pins {
+				pins = "PG6", "PG7";
+				function = "uart1";
+				allwinner,pinmux = <2>;
+			};
+
+			/omit-if-no-ref/
+			uart1_rts_cts_pins: uart1-rts-cts-pins {
+				pins = "PG8", "PG9";
+				function = "uart1";
+				allwinner,pinmux = <2>;
+			};
 		};
 
 		ccu: clock-controller@2001000 {
-- 
2.39.5