[PATCH] tty: serial: fsl_lpuart: Constify struct lpuart_soc_data

[Christophe JAILLET]

'struct lpuart_soc_data' are not modified in this driver.

Constifying these structures moves some data to a read-only section, so
increases overall security.

This also makes the code more consistent.

On a x86_64, with allmodconfig, as an example:
Before:
======
   text	   data	    bss	    dec	    hex	filename
 172668	  23470	    128	 196266	  2feaa	drivers/tty/serial/fsl_lpuart.o

After:
=====
   text	   data	    bss	    dec	    hex	filename
 172924	  23214	    128	 196266	  2feaa	drivers/tty/serial/fsl_lpuart.o

Signed-off-by: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
---
Compile tested only
---
 drivers/tty/serial/fsl_lpuart.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 2790b4078e7e..c9519e649e82 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -318,27 +318,27 @@ static const struct lpuart_soc_data ls1028a_data = {
 	.rx_watermark = 0,
 };
 
-static struct lpuart_soc_data imx7ulp_data = {
+static const struct lpuart_soc_data imx7ulp_data = {
 	.devtype = IMX7ULP_LPUART,
 	.iotype = UPIO_MEM32,
 	.reg_off = IMX_REG_OFF,
 	.rx_watermark = 1,
 };
 
-static struct lpuart_soc_data imx8ulp_data = {
+static const struct lpuart_soc_data imx8ulp_data = {
 	.devtype = IMX8ULP_LPUART,
 	.iotype = UPIO_MEM32,
 	.reg_off = IMX_REG_OFF,
 	.rx_watermark = 3,
 };
 
-static struct lpuart_soc_data imx8qxp_data = {
+static const struct lpuart_soc_data imx8qxp_data = {
 	.devtype = IMX8QXP_LPUART,
 	.iotype = UPIO_MEM32,
 	.reg_off = IMX_REG_OFF,
 	.rx_watermark = 7, /* A lower watermark is ideal for low baud rates. */
 };
-static struct lpuart_soc_data imxrt1050_data = {
+static const struct lpuart_soc_data imxrt1050_data = {
 	.devtype = IMXRT1050_LPUART,
 	.iotype = UPIO_MEM32,
 	.reg_off = IMX_REG_OFF,
-- 
2.50.0