Re: [PATCH 0/2] Add support for IQ-8275-evk board

[Rob Herring]

On Mon, Jun 23, 2025 at 05:50:11PM +0200, Konrad Dybcio wrote:
> On 6/23/25 5:46 PM, 'Rob Herring (Arm)' via kernel wrote:
> > 
> > On Mon, 23 Jun 2025 18:34:18 +0530, Umang Chheda wrote:
> >> This series:
> >>
> >> Add support for Qualcomm's IQ-8275-evk board using QCS8275 SOC.
> 
> [...]
> 
> >>
> >>  .../devicetree/bindings/arm/qcom.yaml         |   7 +
> >>  arch/arm64/boot/dts/qcom/Makefile             |   1 +
> >>  .../boot/dts/qcom/qcs8275-iq-8275-evk.dts     | 241 ++++++++++++++++++
> >>  3 files changed, 249 insertions(+)
> >>  create mode 100644 arch/arm64/boot/dts/qcom/qcs8275-iq-8275-evk.dts
> >>
> 
> [...]
> 
> > 
> > New warnings running 'make CHECK_DTBS=y for arch/arm64/boot/dts/qcom/' for 20250623130420.3981916-1-umang.chheda@xxxxxxxxxxxxxxxx:
> > 
> > arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dtb: panel@0 (samsung,lsl080al03): 'port' does not match any of the regexes: '^pinctrl-[0-9]+$'
> > 	from schema $id: http://devicetree.org/schemas/display/panel/samsung,s6d7aa0.yaml#
> 
> Seems like a fluke..

Yes, I failed to filter that out.

This is just a before and after run with filtering out everything in 
before. I suspect that sometimes warning lines get interleaved and these 
show up as new.

If QCom was warning free, then this would be less of an issue. :(

Rob