[PATCH v2 0/3] Add initial device tree for Billion Capture+

[Cristian Cozzolino via B4 Relay]

Billion Capture+ is a handset using the MSM8953 SoC released in 2017
and sold by Flipkart.

Add a device tree with initial support for:

- GPIO keys
- SDHCI (internal and external storage)
- USB Device Mode
- Regulators
- Simple framebuffer

Signed-off-by: Cristian Cozzolino <cristian_ci@xxxxxxxxxxxxxx>
---
Changes in v2:
- (patch 3/3):
  - add unit address and label to qseecom (Luca);
  - reorder properties alphabetically in gpio-keys node (Konrad);
  - fix hex values in reg address and size cells: from 0x00 to 0x0 (Konrad);
  - add regulator-allow-set-load property to regulators supplying sdhc1/sdhc2. 
- Link to v1: https://lore.kernel.org/r/20250620-rimob-initial-devicetree-v1-0-8e667ea21f82@xxxxxxxxxxxxxx

---
Cristian Cozzolino (3):
      dt-bindings: vendor-prefixes: Add Flipkart
      dt-bindings: arm: qcom: Add Billion Capture+
      arm64: dts: qcom: msm8953: Add device tree for Billion Capture+

 Documentation/devicetree/bindings/arm/qcom.yaml    |   1 +
 .../devicetree/bindings/vendor-prefixes.yaml       |   2 +
 arch/arm64/boot/dts/qcom/Makefile                  |   1 +
 .../arm64/boot/dts/qcom/msm8953-flipkart-rimob.dts | 255 +++++++++++++++++++++
 4 files changed, 259 insertions(+)
---
base-commit: 0ff41df1cb268fc69e703a08a57ee14ae967d0ca
change-id: 20250620-rimob-initial-devicetree-da86a5bffc8b

Best regards,
-- 
Cristian Cozzolino <cristian_ci@xxxxxxxxxxxxxx>