Re: [PATCH v2 5/5] ARM: dts: qcom: add device tree for Sony Xperia SP

[Konrad Dybcio]

On 6/22/25 8:26 PM, Antony Kurniawan Soemardi wrote:
> Add initial device tree support for the Sony Xperia SP (codename:
> sony-huashan), a smartphone based on the Qualcomm MSM8960T SoC.
> 
> There are two variants of the Xperia SP, one without LTE and one with
> LTE. This device tree should work for both variants, though it has only
> been tested on the non-LTE variant.
> 
> The following are currently supported:
> - Serial console support via gsbi8
> - GPIO keys for volume up/down buttons
> - PM8921 keypad with camera focus/capture keys
> - eMMC (sdcc1) and micro SD card (sdcc3) support
> - USB OTG support
> 
> Other hardware features are not yet implemented.
> 
> Booting notes:
> Booting a kernel requires using the Sony ELF boot image format, which
> embeds the kernel, ramdisk, RPM firmware, and cmdline. This can be
> created using the `mkelf` tool. For example:
> 
>   python2 mkelf.py -o boot.img \
>     kernel+dtb@0x80208000 \
>     ramdisk.img@0x81900000 \
>     RPM.bin@0x00020000,rpm \
>     cmdline.txt@cmdline
> 
> The resulting `boot.img` can then be flashed via fastboot. A detailed
> guide, including an alternative method, is available at:
> https://wiki.postmarketos.org/wiki/Sony_Xperia_SP_(sony-huashan)
> 
> Signed-off-by: Antony Kurniawan Soemardi <linux@xxxxxxxxxxxxxx>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>

Konrad