[PATCH 02/30] clk: mediatek: clk-pll: Add ops for PLLs using set/clr regs and FENC
From: Laura Nao
Date: Mon Jun 23 2025 - 06:31:28 EST
MT8196 uses a combination of set/clr registers to control the PLL
enable state, along with a FENC bit to check the preparation status.
Add new set of PLL clock operations with support for set/clr enable and
FENC status logic.
Signed-off-by: Laura Nao <laura.nao@xxxxxxxxxxxxx>
---
drivers/clk/mediatek/clk-pll.c | 42 +++++++++++++++++++++++++++++++++-
drivers/clk/mediatek/clk-pll.h | 5 ++++
2 files changed, 46 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/mediatek/clk-pll.c b/drivers/clk/mediatek/clk-pll.c
index 49ca25dd5418..8f46de77f42d 100644
--- a/drivers/clk/mediatek/clk-pll.c
+++ b/drivers/clk/mediatek/clk-pll.c
@@ -37,6 +37,13 @@ int mtk_pll_is_prepared(struct clk_hw *hw)
return (readl(pll->en_addr) & BIT(pll->data->pll_en_bit)) != 0;
}
+static int mtk_pll_fenc_is_prepared(struct clk_hw *hw)
+{
+ struct mtk_clk_pll *pll = to_mtk_clk_pll(hw);
+
+ return readl(pll->fenc_addr) & pll->fenc_mask;
+}
+
static unsigned long __mtk_pll_recalc_rate(struct mtk_clk_pll *pll, u32 fin,
u32 pcw, int postdiv)
{
@@ -274,6 +281,25 @@ void mtk_pll_unprepare(struct clk_hw *hw)
writel(r, pll->pwr_addr);
}
+static int mtk_pll_prepare_setclr(struct clk_hw *hw)
+{
+ struct mtk_clk_pll *pll = to_mtk_clk_pll(hw);
+
+ writel(BIT(pll->data->pll_en_bit), pll->en_set_addr);
+
+ /* Wait 20us after enable for the PLL to stabilize */
+ udelay(20);
+
+ return 0;
+}
+
+static void mtk_pll_unprepare_setclr(struct clk_hw *hw)
+{
+ struct mtk_clk_pll *pll = to_mtk_clk_pll(hw);
+
+ writel(BIT(pll->data->pll_en_bit), pll->en_clr_addr);
+}
+
const struct clk_ops mtk_pll_ops = {
.is_prepared = mtk_pll_is_prepared,
.prepare = mtk_pll_prepare,
@@ -283,6 +309,16 @@ const struct clk_ops mtk_pll_ops = {
.set_rate = mtk_pll_set_rate,
};
+const struct clk_ops mtk_pll_fenc_clr_set_ops = {
+ .is_prepared = mtk_pll_fenc_is_prepared,
+ .prepare = mtk_pll_prepare_setclr,
+ .unprepare = mtk_pll_unprepare_setclr,
+ .recalc_rate = mtk_pll_recalc_rate,
+ .round_rate = mtk_pll_round_rate,
+ .set_rate = mtk_pll_set_rate,
+};
+EXPORT_SYMBOL_GPL(mtk_pll_fenc_clr_set_ops);
+
struct clk_hw *mtk_clk_register_pll_ops(struct mtk_clk_pll *pll,
const struct mtk_pll_data *data,
void __iomem *base,
@@ -315,6 +351,9 @@ struct clk_hw *mtk_clk_register_pll_ops(struct mtk_clk_pll *pll,
pll->hw.init = &init;
pll->data = data;
+ pll->fenc_addr = base + data->fenc_sta_ofs;
+ pll->fenc_mask = BIT(data->fenc_sta_bit);
+
init.name = data->name;
init.flags = (data->flags & PLL_AO) ? CLK_IS_CRITICAL : 0;
init.ops = pll_ops;
@@ -337,12 +376,13 @@ struct clk_hw *mtk_clk_register_pll(const struct mtk_pll_data *data,
{
struct mtk_clk_pll *pll;
struct clk_hw *hw;
+ const struct clk_ops *pll_ops = data->ops ? data->ops : &mtk_pll_ops;
pll = kzalloc(sizeof(*pll), GFP_KERNEL);
if (!pll)
return ERR_PTR(-ENOMEM);
- hw = mtk_clk_register_pll_ops(pll, data, base, &mtk_pll_ops);
+ hw = mtk_clk_register_pll_ops(pll, data, base, pll_ops);
if (IS_ERR(hw))
kfree(pll);
diff --git a/drivers/clk/mediatek/clk-pll.h b/drivers/clk/mediatek/clk-pll.h
index c4d06bb11516..7fdc5267a2b5 100644
--- a/drivers/clk/mediatek/clk-pll.h
+++ b/drivers/clk/mediatek/clk-pll.h
@@ -29,6 +29,7 @@ struct mtk_pll_data {
u32 reg;
u32 pwr_reg;
u32 en_mask;
+ u32 fenc_sta_ofs;
u32 pd_reg;
u32 tuner_reg;
u32 tuner_en_reg;
@@ -51,6 +52,7 @@ struct mtk_pll_data {
u32 en_clr_reg;
u8 pll_en_bit; /* Assume 0, indicates BIT(0) by default */
u8 pcw_chg_bit;
+ u8 fenc_sta_bit;
};
/*
@@ -72,6 +74,8 @@ struct mtk_clk_pll {
void __iomem *en_addr;
void __iomem *en_set_addr;
void __iomem *en_clr_addr;
+ void __iomem *fenc_addr;
+ u32 fenc_mask;
const struct mtk_pll_data *data;
};
@@ -82,6 +86,7 @@ void mtk_clk_unregister_plls(const struct mtk_pll_data *plls, int num_plls,
struct clk_hw_onecell_data *clk_data);
extern const struct clk_ops mtk_pll_ops;
+extern const struct clk_ops mtk_pll_fenc_clr_set_ops;
static inline struct mtk_clk_pll *to_mtk_clk_pll(struct clk_hw *hw)
{
--
2.39.5