[PATCH 2/3] riscv: dts: spacemit: Move UARTs under dma-bus for K1

[Vivian Wang]

UART devices in Spacemit K1 use dma-bus DMA translations. Move these
nodes under dma-bus to reflect this fact.

Signed-off-by: Vivian Wang <wangruikang@xxxxxxxxxxx>
---
 arch/riscv/boot/dts/spacemit/k1.dtsi | 246 ++++++++++++++++++-----------------
 1 file changed, 128 insertions(+), 118 deletions(-)

diff --git a/arch/riscv/boot/dts/spacemit/k1.dtsi b/arch/riscv/boot/dts/spacemit/k1.dtsi
index 99c76997b367f733c9dda2c30dd85817294ef9b7..0d41694699851e672a833601b62c2b2ad3daae79 100644
--- a/arch/riscv/boot/dts/spacemit/k1.dtsi
+++ b/arch/riscv/boot/dts/spacemit/k1.dtsi
@@ -357,114 +357,6 @@ syscon_apbc: system-controller@d4015000 {
 			#reset-cells = <1>;
 		};
 
-		uart0: serial@d4017000 {
-			compatible = "spacemit,k1-uart", "intel,xscale-uart";
-			reg = <0x0 0xd4017000 0x0 0x100>;
-			clocks = <&syscon_apbc CLK_UART0>,
-				 <&syscon_apbc CLK_UART0_BUS>;
-			clock-names = "core", "bus";
-			interrupts = <42>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			status = "disabled";
-		};
-
-		uart2: serial@d4017100 {
-			compatible = "spacemit,k1-uart", "intel,xscale-uart";
-			reg = <0x0 0xd4017100 0x0 0x100>;
-			clocks = <&syscon_apbc CLK_UART2>,
-				 <&syscon_apbc CLK_UART2_BUS>;
-			clock-names = "core", "bus";
-			interrupts = <44>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			status = "disabled";
-		};
-
-		uart3: serial@d4017200 {
-			compatible = "spacemit,k1-uart", "intel,xscale-uart";
-			reg = <0x0 0xd4017200 0x0 0x100>;
-			clocks = <&syscon_apbc CLK_UART3>,
-				 <&syscon_apbc CLK_UART3_BUS>;
-			clock-names = "core", "bus";
-			interrupts = <45>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			status = "disabled";
-		};
-
-		uart4: serial@d4017300 {
-			compatible = "spacemit,k1-uart", "intel,xscale-uart";
-			reg = <0x0 0xd4017300 0x0 0x100>;
-			clocks = <&syscon_apbc CLK_UART4>,
-				 <&syscon_apbc CLK_UART4_BUS>;
-			clock-names = "core", "bus";
-			interrupts = <46>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			status = "disabled";
-		};
-
-		uart5: serial@d4017400 {
-			compatible = "spacemit,k1-uart", "intel,xscale-uart";
-			reg = <0x0 0xd4017400 0x0 0x100>;
-			clocks = <&syscon_apbc CLK_UART5>,
-				 <&syscon_apbc CLK_UART5_BUS>;
-			clock-names = "core", "bus";
-			interrupts = <47>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			status = "disabled";
-		};
-
-		uart6: serial@d4017500 {
-			compatible = "spacemit,k1-uart", "intel,xscale-uart";
-			reg = <0x0 0xd4017500 0x0 0x100>;
-			clocks = <&syscon_apbc CLK_UART6>,
-				 <&syscon_apbc CLK_UART6_BUS>;
-			clock-names = "core", "bus";
-			interrupts = <48>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			status = "disabled";
-		};
-
-		uart7: serial@d4017600 {
-			compatible = "spacemit,k1-uart", "intel,xscale-uart";
-			reg = <0x0 0xd4017600 0x0 0x100>;
-			clocks = <&syscon_apbc CLK_UART7>,
-				 <&syscon_apbc CLK_UART7_BUS>;
-			clock-names = "core", "bus";
-			interrupts = <49>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			status = "disabled";
-		};
-
-		uart8: serial@d4017700 {
-			compatible = "spacemit,k1-uart", "intel,xscale-uart";
-			reg = <0x0 0xd4017700 0x0 0x100>;
-			clocks = <&syscon_apbc CLK_UART8>,
-				 <&syscon_apbc CLK_UART8_BUS>;
-			clock-names = "core", "bus";
-			interrupts = <50>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			status = "disabled";
-		};
-
-		uart9: serial@d4017800 {
-			compatible = "spacemit,k1-uart", "intel,xscale-uart";
-			reg = <0x0 0xd4017800 0x0 0x100>;
-			clocks = <&syscon_apbc CLK_UART9>,
-				 <&syscon_apbc CLK_UART9_BUS>;
-			clock-names = "core", "bus";
-			interrupts = <51>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			status = "disabled";
-		};
-
 		gpio: gpio@d4019000 {
 			compatible = "spacemit,k1-gpio";
 			reg = <0x0 0xd4019000 0x0 0x100>;
@@ -562,16 +454,6 @@ clint: timer@e4000000 {
 					      <&cpu7_intc 3>, <&cpu7_intc 7>;
 		};
 
-		sec_uart1: serial@f0612000 {
-			compatible = "spacemit,k1-uart", "intel,xscale-uart";
-			reg = <0x0 0xf0612000 0x0 0x100>;
-			interrupts = <43>;
-			clock-frequency = <14857000>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			status = "reserved"; /* for TEE usage */
-		};
-
 		camera-bus {
 			compatible = "simple-bus";
 			ranges;
@@ -588,6 +470,134 @@ dma-bus {
 			#size-cells = <2>;
 			dma-ranges = <0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>,
 				     <0x1 0x00000000 0x1 0x80000000 0x3 0x00000000>;
+
+			uart0: serial@d4017000 {
+				compatible = "spacemit,k1-uart",
+					     "intel,xscale-uart";
+				reg = <0x0 0xd4017000 0x0 0x100>;
+				clocks = <&syscon_apbc CLK_UART0>,
+					 <&syscon_apbc CLK_UART0_BUS>;
+				clock-names = "core", "bus";
+				interrupts = <42>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				status = "disabled";
+			};
+
+			uart2: serial@d4017100 {
+				compatible = "spacemit,k1-uart",
+					     "intel,xscale-uart";
+				reg = <0x0 0xd4017100 0x0 0x100>;
+				clocks = <&syscon_apbc CLK_UART2>,
+					 <&syscon_apbc CLK_UART2_BUS>;
+				clock-names = "core", "bus";
+				interrupts = <44>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				status = "disabled";
+			};
+
+			uart3: serial@d4017200 {
+				compatible = "spacemit,k1-uart",
+					     "intel,xscale-uart";
+				reg = <0x0 0xd4017200 0x0 0x100>;
+				clocks = <&syscon_apbc CLK_UART3>,
+					 <&syscon_apbc CLK_UART3_BUS>;
+				clock-names = "core", "bus";
+				interrupts = <45>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				status = "disabled";
+			};
+
+			uart4: serial@d4017300 {
+				compatible = "spacemit,k1-uart",
+					     "intel,xscale-uart";
+				reg = <0x0 0xd4017300 0x0 0x100>;
+				clocks = <&syscon_apbc CLK_UART4>,
+					 <&syscon_apbc CLK_UART4_BUS>;
+				clock-names = "core", "bus";
+				interrupts = <46>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				status = "disabled";
+			};
+
+			uart5: serial@d4017400 {
+				compatible = "spacemit,k1-uart",
+					     "intel,xscale-uart";
+				reg = <0x0 0xd4017400 0x0 0x100>;
+				clocks = <&syscon_apbc CLK_UART5>,
+					 <&syscon_apbc CLK_UART5_BUS>;
+				clock-names = "core", "bus";
+				interrupts = <47>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				status = "disabled";
+			};
+
+			uart6: serial@d4017500 {
+				compatible = "spacemit,k1-uart",
+					     "intel,xscale-uart";
+				reg = <0x0 0xd4017500 0x0 0x100>;
+				clocks = <&syscon_apbc CLK_UART6>,
+					 <&syscon_apbc CLK_UART6_BUS>;
+				clock-names = "core", "bus";
+				interrupts = <48>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				status = "disabled";
+			};
+
+			uart7: serial@d4017600 {
+				compatible = "spacemit,k1-uart",
+					     "intel,xscale-uart";
+				reg = <0x0 0xd4017600 0x0 0x100>;
+				clocks = <&syscon_apbc CLK_UART7>,
+					 <&syscon_apbc CLK_UART7_BUS>;
+				clock-names = "core", "bus";
+				interrupts = <49>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				status = "disabled";
+			};
+
+			uart8: serial@d4017700 {
+				compatible = "spacemit,k1-uart",
+					     "intel,xscale-uart";
+				reg = <0x0 0xd4017700 0x0 0x100>;
+				clocks = <&syscon_apbc CLK_UART8>,
+					 <&syscon_apbc CLK_UART8_BUS>;
+				clock-names = "core", "bus";
+				interrupts = <50>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				status = "disabled";
+			};
+
+			uart9: serial@d4017800 {
+				compatible = "spacemit,k1-uart",
+					     "intel,xscale-uart";
+				reg = <0x0 0xd4017800 0x0 0x100>;
+				clocks = <&syscon_apbc CLK_UART9>,
+					 <&syscon_apbc CLK_UART9_BUS>;
+				clock-names = "core", "bus";
+				interrupts = <51>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				status = "disabled";
+			};
+
+			sec_uart1: serial@f0612000 {
+				compatible = "spacemit,k1-uart",
+					     "intel,xscale-uart";
+				reg = <0x0 0xf0612000 0x0 0x100>;
+				interrupts = <43>;
+				clock-frequency = <14857000>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				status = "reserved"; /* for TEE usage */
+			};
 		};
 
 		multimedia-bus {

-- 
2.49.0