Re: [PATCH 3/9] iio: adc: ad_sigma_delta: use BITS_TO_BYTES() macro

[Jonathan Cameron]

On Fri, 20 Jun 2025 17:20:09 -0500
David Lechner <dlechner@xxxxxxxxxxxx> wrote:

> Use the BITS_TO_BYTES() macro instead of dividing by 8 to convert bits
> to bytes.
> 
> This makes it more obvious what unit conversion is taking place.
> 
> In once instance, we also avoid the temporary assignment to a variable

In one instance

(don't bother fixing that unless doing a v2 for some other reason)

> as it was confusing that reg_size was being used with two different
> units (bits and bytes).
> 
> Signed-off-by: David Lechner <dlechner@xxxxxxxxxxxx>
> ---
>  drivers/iio/adc/ad_sigma_delta.c | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/iio/adc/ad_sigma_delta.c b/drivers/iio/adc/ad_sigma_delta.c
> index 1657f64f1c0465b249adcc8a70dda8faf4a90565..fa792c800c80f960aca75b28a60cb2588e69fe7d 100644
> --- a/drivers/iio/adc/ad_sigma_delta.c
> +++ b/drivers/iio/adc/ad_sigma_delta.c
> @@ -7,6 +7,7 @@
>   */
>  
>  #include <linux/align.h>
> +#include <linux/bitops.h>
>  #include <linux/device.h>
>  #include <linux/err.h>
>  #include <linux/interrupt.h>
> @@ -190,7 +191,7 @@ int ad_sd_reset(struct ad_sigma_delta *sigma_delta)
>  	unsigned int size;
>  	int ret;
>  
> -	size = DIV_ROUND_UP(reset_length, 8);
> +	size = BITS_TO_BYTES(reset_length);
>  	buf = kcalloc(size, sizeof(*buf), GFP_KERNEL);
>  	if (!buf)
>  		return -ENOMEM;
> @@ -419,7 +420,7 @@ int ad_sigma_delta_single_conversion(struct iio_dev *indio_dev,
>  		data_reg = AD_SD_REG_DATA;
>  
>  	ret = ad_sd_read_reg(sigma_delta, data_reg,
> -		DIV_ROUND_UP(chan->scan_type.realbits + chan->scan_type.shift, 8),
> +		BITS_TO_BYTES(chan->scan_type.realbits + chan->scan_type.shift),
>  		&raw_sample);
>  
>  out:
> @@ -552,9 +553,8 @@ static irqreturn_t ad_sd_trigger_handler(int irq, void *p)
>  	unsigned int reg_size;
>  	unsigned int data_reg;
>  
> -	reg_size = indio_dev->channels[0].scan_type.realbits +
> -			indio_dev->channels[0].scan_type.shift;
> -	reg_size = DIV_ROUND_UP(reg_size, 8);
> +	reg_size = BITS_TO_BYTES(indio_dev->channels[0].scan_type.realbits +
> +				 indio_dev->channels[0].scan_type.shift);
>  
>  	if (sigma_delta->info->data_reg != 0)
>  		data_reg = sigma_delta->info->data_reg;
> @@ -616,7 +616,7 @@ static irqreturn_t ad_sd_trigger_handler(int irq, void *p)
>  		}
>  	}
>  
> -	sample_size = indio_dev->channels[0].scan_type.storagebits / 8;
> +	sample_size = BITS_TO_BYTES(indio_dev->channels[0].scan_type.storagebits);
>  	sample_pos = sample_size * sigma_delta->current_slot;
>  	memcpy(&sigma_delta->samples_buf[sample_pos], data, sample_size);
>  	sigma_delta->current_slot++;
>