[PATCH v1 48/55] media: i2c: st-mipid02: Use the v4l2 helper for obtaining the clock

[Mehdi Djait]

devm_clk_get() fails on ACPI-based platforms, where firmware does not
provide a direct reference to the clock producer.

Replace devm_clk_get() with the new v4l2 helper
devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based
platforms to retrieve a reference to the clock producer from firmware.

Signed-off-by: Mehdi Djait <mehdi.djait@xxxxxxxxxxxxxxx>

diff --git a/drivers/media/i2c/st-mipid02.c b/drivers/media/i2c/st-mipid02.c
index f4568e87f018..ea848b52f628 100644
--- a/drivers/media/i2c/st-mipid02.c
+++ b/drivers/media/i2c/st-mipid02.c
@@ -817,7 +817,7 @@ static int mipid02_probe(struct i2c_client *client)
 	v4l2_i2c_subdev_init(&bridge->sd, client, &mipid02_subdev_ops);
 
 	/* got and check clock */
-	bridge->xclk = devm_clk_get(dev, "xclk");
+	bridge->xclk = devm_v4l2_sensor_clk_get(dev, "xclk");
 	if (IS_ERR(bridge->xclk)) {
 		dev_err(dev, "failed to get xclk\n");
 		return PTR_ERR(bridge->xclk);