Re: [PATCH ath-next v2] wifi: ath12k: handle regulatory hints during mac registration

[Vasanthakumar Thiagarajan]

On 6/17/2025 9:05 AM, Aditya Kumar Singh wrote:
> If a regulatory notification is there in the system while the hardware is
> being registered, it attempts to set the new regulatory country. However,
> ath12k currently boots with a default country derived from the BDF. If this
> default country differs from the one provided in the notification, a race
> condition can occur while updating the regulatory information back to
> userspace. This potentially leads to driver having the incorrect regulatory
> applied.
>
> For example, suppose the regulatory domain for France (FR) is already
> applied, and then the driver is loaded with a BDF that has the United
> States (US) country programmed. When the driver finishes loading, the
> regulatory domain shown in phyX still reflects the US regulatory settings.
> This is incorrect, as the driver had already received a notification for
> FR during hardware registration, but failed to process it properly due to
> the race condition.
>
> The race condition exists during driver initialization and hardware
> registration:
> - On driver load, the firmware sends BDF-based country regulatory rules,
>    which are stored in default_regd via ath12k_reg_handle_chan_list().
>
> - During hardware registration, a regulatory notification is triggered
>    through:
>      ath12k_mac_hw_register()
>        -> ieee80211_register_hw()
>          -> wiphy_register()
>            -> wiphy_regulatory_register()
>              -> reg_call_notifier()
>
>    This sends a country code to the firmware, which responds with updated
>    regulatory rules.
>
> - After registration, ath12k_mac_hw_register() calls ath12k_regd_update(),
>    which copies default_regd and passes it to the upper layers.
>
> The race occurs between the firmware's response and the execution of
> ath12k_regd_update(). If the firmware's new rules are processed before the
> update call, the correct values are used. Otherwise, outdated boot-time
> country settings are exposed to userspace.
>
> To resolve this issue, introduce a completion mechanism within the hardware
> group (ah). Trigger this completion whenever a regulatory change is
> requested from the firmware. Then, in ath12k_regd_update(), wait for the
> firmware to complete its regulatory processing before proceeding with the
> update.
>
> This ensures that during driver load, the default country is processed
> first. However, before ath12k_regd_update() is called, the new regulatory
> notification will have already been received by the driver. As a result, it
> will wait for the firmware's regulatory processing to complete, and only
> the final, correct regulatory domain will be updated to userspace.
>
> Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
>
> Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@xxxxxxxxxxxxxxxx>

Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@xxxxxxxxxxxxxxxx>