Re: [PATCH 4/4] PCI: hv: Use the correct hypercall for unmasking interrupts on nested

[Nuno Das Neves]

On 6/11/2025 4:07 PM, Michael Kelley wrote:
> From: Nuno Das Neves <nunodasneves@xxxxxxxxxxxxxxxxxxx> Sent: Tuesday, June 10, 2025 4:52 PM
>>
>> From: Stanislav Kinsburskii <skinsburskii@xxxxxxxxxxxxxxxxxxx>
>>
>> Running as nested root on MSHV imposes a different requirement
>> for the pci-hyperv controller.
>>
>> In this setup, the interrupt will first come to the L1 (nested) hypervisor,
>> which will deliver it to the appropriate root CPU. Instead of issuing the
>> RETARGET hypercall, we should issue the MAP_DEVICE_INTERRUPT
>> hypercall to L1 to complete the setup.
>>
>> Rename hv_arch_irq_unmask() to hv_irq_retarget_interrupt().
>>
>> Co-developed-by: Jinank Jain <jinankjain@xxxxxxxxxxxxxxxxxxx>
>> Signed-off-by: Jinank Jain <jinankjain@xxxxxxxxxxxxxxxxxxx>
>> Signed-off-by: Stanislav Kinsburskii <skinsburskii@xxxxxxxxxxxxxxxxxxx>
>> Signed-off-by: Nuno Das Neves <nunodasneves@xxxxxxxxxxxxxxxxxxx>
>> ---
>>  drivers/pci/controller/pci-hyperv.c | 18 ++++++++++++++++--
>>  1 file changed, 16 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c
>> index 4d25754dfe2f..0f491c802fb9 100644
>> --- a/drivers/pci/controller/pci-hyperv.c
>> +++ b/drivers/pci/controller/pci-hyperv.c
>> @@ -600,7 +600,7 @@ static unsigned int hv_msi_get_int_vector(struct irq_data *data)
>>  #define hv_msi_prepare		pci_msi_prepare
>>
>>  /**
>> - * hv_arch_irq_unmask() - "Unmask" the IRQ by setting its current
>> + * hv_irq_retarget_interrupt() - "Unmask" the IRQ by setting its current
>>   * affinity.
>>   * @data:	Describes the IRQ
>>   *
>> @@ -609,7 +609,7 @@ static unsigned int hv_msi_get_int_vector(struct irq_data *data)
>>   * is built out of this PCI bus's instance GUID and the function
>>   * number of the device.
>>   */
>> -static void hv_arch_irq_unmask(struct irq_data *data)
>> +static void hv_irq_retarget_interrupt(struct irq_data *data)
>>  {
>>  	struct msi_desc *msi_desc = irq_data_get_msi_desc(data);
>>  	struct hv_retarget_device_interrupt *params;
>> @@ -714,6 +714,20 @@ static void hv_arch_irq_unmask(struct irq_data *data)
>>  		dev_err(&hbus->hdev->device,
>>  			"%s() failed: %#llx", __func__, res);
>>  }
>> +
>> +static void hv_arch_irq_unmask(struct irq_data *data)
>> +{
>> +	if (hv_nested && hv_root_partition())
> 
> Based on Patch 1 of this series, this driver is not loaded for the root
> partition in the non-nested case. So testing hv_nested is redundant.
> 

Good point, I'll change it to just check for hv_root_partition() here.

>> +		/*
>> +		 * In case of the nested root partition, the nested hypervisor
>> +		 * is taking care of interrupt remapping and thus the
>> +		 * MAP_DEVICE_INTERRUPT hypercall is required instead of
>> +		 * RETARGET_INTERRUPT.
>> +		 */
>> +		(void)hv_map_msi_interrupt(data, NULL);
>> +	else
>> +		hv_irq_retarget_interrupt(data);
>> +}
>>  #elif defined(CONFIG_ARM64)
>>  /*
>>   * SPI vectors to use for vPCI; arch SPIs range is [32, 1019], but leaving a bit
>> --
>> 2.34.1