Re: [PATCH RESEND net-next v5 1/2] dt-bindings: net: qca,ar803x: Add IPQ5018 Internal GE PHY support

[Jakub Kicinski]

On Fri, 13 Jun 2025 05:55:07 +0400 George Moussalem via B4 Relay wrote:
> From: George Moussalem <george.moussalem@xxxxxxxxxxx>
> 
> Document the IPQ5018 Internal Gigabit Ethernet PHY found in the IPQ5018
> SoC. Its output pins provide an MDI interface to either an external
> switch in a PHY to PHY link scenario or is directly attached to an RJ45
> connector.
> 
> The PHY supports 10/100/1000 mbps link modes, CDT, auto-negotiation and
> 802.3az EEE.
> 
> For operation, the LDO controller found in the IPQ5018 SoC for which
> there is provision in the mdio-4019 driver.
> 
> Two common archictures across IPQ5018 boards are:
> 1. IPQ5018 PHY --> MDI --> RJ45 connector
> 2. IPQ5018 PHY --> MDI --> External PHY
> In a phy to phy architecture, the DAC needs to be configured to
> accommodate for the short cable length. As such, add an optional boolean
> property so the driver sets preset DAC register values accordingly.

Hi DT Maintainers!  Is this in anyone's review queue?
I see some comments from Rob on v2 but no reviews since.