[PATCH v2 2/2] EDAC/igen6: Reduce log level to debug for absent memory controllers

[Qiuxu Zhuo]

The current KERN_WARNING level message for detecting absent memory
controllers is overly dramatic. The BIOS likely had valid reasons to
disable the memory controller (e.g. it isn't connected to any DIMM
slots on the motherboard for this system). So there's nothing actually
wrong that needs to be fixed.

Reduce the log level to KERN_DEBUG to eliminate the false warning.

Suggested-by: Tony Luck <tony.luck@xxxxxxxxx>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@xxxxxxxxx>
---
 drivers/edac/igen6_edac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/edac/igen6_edac.c b/drivers/edac/igen6_edac.c
index 1cb5c67e78ae..5ffe9579959f 100644
--- a/drivers/edac/igen6_edac.c
+++ b/drivers/edac/igen6_edac.c
@@ -1351,7 +1351,7 @@ static int igen6_register_mcis(struct pci_dev *pdev, u64 mchbar)
 	}
 
 	if (lmc < res_cfg->num_imc) {
-		igen6_printk(KERN_WARNING, "Expected %d mcs, but only %d detected.",
+		igen6_printk(KERN_DEBUG, "Expected %d mcs, but only %d detected.",
 			     res_cfg->num_imc, lmc);
 		res_cfg->num_imc = lmc;
 	}
-- 
2.43.0