[PATCH v5 3/4] dt-bindings: clock: cdce6214: add binding for pin configuration

[Sascha Hauer]

Add pin configuration binding for the TI CDCE6214. The CDCE6214 has
an internal EEPROM to to fully configure the chip, but this EEPROM
might be empty, so add support for configuring the chip through
the device tree.

Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
---
 .../devicetree/bindings/clock/ti,cdce6214.yaml     | 95 ++++++++++++++++++++++
 1 file changed, 95 insertions(+)

diff --git a/Documentation/devicetree/bindings/clock/ti,cdce6214.yaml b/Documentation/devicetree/bindings/clock/ti,cdce6214.yaml
index 0a952b634079ec74bbf1114d1beb9fd5ee8682ec..615aac29761e7e3d5c5c0147f5246c9bdd228210 100644
--- a/Documentation/devicetree/bindings/clock/ti,cdce6214.yaml
+++ b/Documentation/devicetree/bindings/clock/ti,cdce6214.yaml
@@ -33,9 +33,78 @@ properties:
       - enum: [ priref, secref ]
       - const: secref
 
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
   '#clock-cells':
     const: 1
 
+patternProperties:
+  '^clk@[0-1]$':
+    type: object
+    description:
+      optional child node that can be used to specify input pin parameters. The reg
+      properties match the CDCE6214_CLK_* defines.
+
+    additionalProperties: false
+
+    properties:
+      reg:
+        description:
+          clock input identifier.
+        minimum: 0
+        maximum: 1
+
+      ti,clkin-fmt:
+        enum: [ lvcmos, xtal, differential ]
+        description:
+          Clock input format.
+
+      ti,xo-cload-femtofarads:
+        description:
+          Selects load cap for XO in femto Farad (fF). Up to 9000fF
+        minimum: 3000
+        maximum: 9000
+
+      ti,xo-bias-current-microamp:
+        description:
+          Bias current setting of the XO.
+        minimum: 0
+        maximum: 1758
+
+  '^clk@[2-9]$':
+    type: object
+    description:
+      optional child node that can be used to specify output pin parameters.  The reg
+      properties match the CDCE6214_CLK_* defines.
+
+    additionalProperties: false
+
+    properties:
+      reg:
+        description:
+          clock output identifier.
+        minimum: 2
+        maximum: 9
+
+      ti,clkout-fmt:
+        enum: [ cmos, lvds, lp-hcsl ]
+        description:
+          Clock output format.
+
+      ti,cmosn-mode:
+        enum: [ disabled, high, low ]
+        description:
+          CMOSN output mode.
+
+      ti,cmosp-mode:
+        enum: [ disabled, high, low ]
+        description:
+          CMOSP output mode.
+
 required:
   - compatible
   - reg
@@ -53,8 +122,34 @@ examples:
         clock-generator@67 {
             compatible = "ti,cdce6214";
             reg = <0x67>;
+            #address-cells = <1>;
+            #size-cells = <0>;
             #clock-cells = <1>;
             clocks = <&clock_ref25m>;
             clock-names = "secref";
+
+            clk@1 {
+                reg = <1>; // CDCE6214_CLK_SECREF
+                ti,clkin-fmt = "xtal";
+                ti,xo-cload-femtofarads = <4400>;
+                ti,xo-bias-current-microamp = <295>;
+            };
+
+            clk@3 {
+                reg = <3>; // CDCE6214_CLK_OUT1
+                ti,clkout-fmt = "cmos";
+                ti,cmosp-mode = "high";
+                ti,cmosn-mode = "low";
+            };
+
+            clk@4 {
+                reg = <4>; // CDCE6214_CLK_OUT2
+                ti,clkout-fmt = "lvds";
+            };
+
+            clk@6 {
+                reg = <6>; // CDCE6214_CLK_OUT4
+                ti,clkout-fmt = "lp-hcsl";
+            };
         };
     };

-- 
2.39.5