[PATCH v6 2/4] iio: accel: sca3000: clean sca3000_read_data()

[Andrew Ijano]

Clean internal sca3000_read_data() helper by removing unnecessary
arguments and return logic.

Signed-off-by: Andrew Ijano <andrew.lopes@xxxxxxxxxxxxx>
Co-developed-by: Gustavo Bastos <gustavobastos@xxxxxx>
Signed-off-by: Gustavo Bastos <gustavobastos@xxxxxx>
---
 drivers/iio/accel/sca3000.c | 13 ++++---------
 1 file changed, 4 insertions(+), 9 deletions(-)

diff --git a/drivers/iio/accel/sca3000.c b/drivers/iio/accel/sca3000.c
index c85a06cbea37..7145b4541264 100644
--- a/drivers/iio/accel/sca3000.c
+++ b/drivers/iio/accel/sca3000.c
@@ -939,7 +939,6 @@ static const struct attribute_group sca3000_attribute_group = {
 
 static int sca3000_read_data(struct sca3000_state *st,
 			     u8 reg_address_high,
-			     u8 *rx,
 			     int len)
 {
 	int ret;
@@ -949,18 +948,15 @@ static int sca3000_read_data(struct sca3000_state *st,
 			.tx_buf = st->tx,
 		}, {
 			.len = len,
-			.rx_buf = rx,
+			.rx_buf = st->rx,
 		}
 	};
 
 	st->tx[0] = SCA3000_READ_REG(reg_address_high);
 	ret = spi_sync_transfer(st->us, xfer, ARRAY_SIZE(xfer));
-	if (ret) {
+	if (ret)
 		dev_err(&st->us->dev, "problem reading register\n");
-		return ret;
-	}
-
-	return 0;
+	return ret;
 }
 
 /**
@@ -984,8 +980,7 @@ static void sca3000_ring_int_process(u8 val, struct iio_dev *indio_dev)
 		 * num_available is the total number of samples available
 		 * i.e. number of time points * number of channels.
 		 */
-		ret = sca3000_read_data(st, SCA3000_REG_RING_OUT_ADDR, st->rx,
-					num_available * 2);
+		ret = sca3000_read_data(st, SCA3000_REG_RING_OUT_ADDR, num_available * 2);
 		if (ret)
 			goto error_ret;
 		for (i = 0; i < num_available / 3; i++) {
-- 
2.49.0