Re: [PATCH v2 3/4] arm64: dts: qcom: msm8976: Add sdc2 GPIOs

[Konrad Dybcio]

On 6/15/25 10:35 PM, André Apitzsch via B4 Relay wrote:
> From: André Apitzsch <git@xxxxxxxxxxx>
> 
> Downstream vendor code for reference:
> 
> https://git.codelinaro.org/clo/la/kernel/msm-3.10/-/blob/LA.BR.1.3.7.c26/arch/arm/boot/dts/qcom/msm8976-pinctrl.dtsi#L223-263
> 
> Signed-off-by: André Apitzsch <git@xxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/msm8976.dtsi | 36 +++++++++++++++++++++++++++++++++++
>  1 file changed, 36 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/msm8976.dtsi b/arch/arm64/boot/dts/qcom/msm8976.dtsi
> index 2a30246384700dac2ec868c6f371248cfcc643fc..f9962512f243d6c1af4931787f4602554c63bb39 100644
> --- a/arch/arm64/boot/dts/qcom/msm8976.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8976.dtsi
> @@ -782,6 +782,42 @@ blsp2_i2c4_sleep: blsp2-i2c4-sleep-state {
>  				bias-disable;
>  			};
>  
> +			sdc2_default: sdc2-default-state {
> +				clk-pins {
> +					pins = "sdc2_clk";
> +					bias-disable;
> +					drive-strength = <16>;

Should you send a v3, please reorder the bias properties to below
drive-strength for consistency

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>

Konrad