Re: [PATCH net-next v6 0/3] dpll: add all inputs phase offset monitor

[patchwork-bot+netdevbpf]

Hello:

This series was applied to netdev/net-next.git (main)
by Jakub Kicinski <kuba@xxxxxxxxxx>:

On Thu, 12 Jun 2025 17:28:32 +0200 you wrote:
> Add dpll device level feature: phase offset monitor.
> 
> Phase offset measurement is typically performed against the current active
> source. However, some DPLL (Digital Phase-Locked Loop) devices may offer
> the capability to monitor phase offsets across all available inputs.
> The attribute and current feature state shall be included in the response
> message of the ``DPLL_CMD_DEVICE_GET`` command for supported DPLL devices.
> In such cases, users can also control the feature using the
> ``DPLL_CMD_DEVICE_SET`` command by setting the ``enum dpll_feature_state``
> values for the attribute.
> Once enabled the phase offset measurements for the input shall be returned
> in the ``DPLL_A_PIN_PHASE_OFFSET`` attribute.
> 
> [...]

Here is the summary with links:
  - [net-next,v6,1/3] dpll: add phase-offset-monitor feature to netlink spec
    https://git.kernel.org/netdev/net-next/c/c035e7360380
  - [net-next,v6,2/3] dpll: add phase_offset_monitor_get/set callback ops
    https://git.kernel.org/netdev/net-next/c/2952daf44a84
  - [net-next,v6,3/3] ice: add phase offset monitor for all PPS dpll inputs
    https://git.kernel.org/netdev/net-next/c/863c7e505936

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html