[PATCH v2 5/7] regulator: tps6594-regulator: remove hardcoded buck config

[Michael Walle]

Commit 00c826525fba ("regulator: tps6594-regulator: Add TI TPS65224 PMIC
regulators") added support for the TPS65224 and made the description of
the multi-phase buck converter variable depending on the variant of the
PMIC. But this was just done for MUTLI_BUCK12 and MULTI_BUCK12_34
configs probably because this variant only supports a multi-phase
configuration on buck 1 and 2. Remove the hardcoded value for the
remaining two configs, too as future PMIC variants might also support
these.

This is a preparation patch to refactor the regulator description and
is compile-time only tested.

Signed-off-by: Michael Walle <mwalle@xxxxxxxxxx>
---
 drivers/regulator/tps6594-regulator.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/regulator/tps6594-regulator.c b/drivers/regulator/tps6594-regulator.c
index 26669f3f1033..2c7c4df80695 100644
--- a/drivers/regulator/tps6594-regulator.c
+++ b/drivers/regulator/tps6594-regulator.c
@@ -695,14 +695,14 @@ static int tps6594_regulator_probe(struct platform_device *pdev)
 
 		if (i == MULTI_BUCK123 || i == MULTI_BUCK1234) {
 			error = tps6594_request_reg_irqs(pdev, rdev, irq_data,
-							 tps6594_bucks_irq_types[buck_idx + 2],
+							 bucks_irq_types[buck_idx + 2],
 							 nr_types, &irq_idx);
 			if (error)
 				return error;
 		}
 		if (i == MULTI_BUCK1234) {
 			error = tps6594_request_reg_irqs(pdev, rdev, irq_data,
-							 tps6594_bucks_irq_types[buck_idx + 3],
+							 bucks_irq_types[buck_idx + 3],
 							 nr_types, &irq_idx);
 			if (error)
 				return error;
-- 
2.39.5