Re: [PATCH v13 2/2] arm64: dts: qcom: ipq5018: Add tsens node

[Konrad Dybcio]

On 6/12/25 8:46 AM, George Moussalem via B4 Relay wrote:
> From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
> 
> IPQ5018 has tsens V1.0 IP with 5 sensors, though 4 are in use.
> There is no RPM, so tsens has to be manually enabled. Adding the tsens
> and nvmem nodes and adding 4 thermal sensors (zones). The critical trip
> temperature is set to 120'C with an action to reboot.
> 
> In addition, adding a cooling device to the CPU thermal zone which uses
> CPU frequency scaling.
> 
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> Signed-off-by: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
> Signed-off-by: George Moussalem <george.moussalem@xxxxxxxxxxx>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>

Konrad