Re: [PATCH 2/4] spi: spi-fsl-dspi: Use non-coherent memory for DMA

[Mark Brown]

On Thu, Jun 12, 2025 at 03:14:32PM +0100, James Clark wrote:
> On 12/06/2025 12:15 pm, Vladimir Oltean wrote:

> > FWIW, the XSPI FIFO performance should be higher.

> This leads me to realise a mistake in my original figures. My head was stuck
> in target mode where we use DMA so I forgot to force DMA in host mode to run
> the performance tests. The previous figures were all XSPI mode and the small
> difference in performance could have been just down to the layout of the
> code changing?

> Changing it to DMA mode gives figures that make much more sense:

If not having DMA mode is making this much of a difference shouldn't the
driver just do that?  I'm not seeing runtime configuration in the driver
so I guess this is local hacking...

> So for small transfers XSPI is slightly better but for large ones DMA is
> much better, with non-coherent memory giving another 800kbps gain. Perhaps
> we could find the midpoint and then auto select the mode depending on the
> size, but maybe there is latency to consider too which could be important.

This is a fairly normal pattern, it's a big part of why the can_dma()
callback is per transfer - so you can do a copybreak and use PIO for
smaller transfers where the overhead of setting up DMA is often more
than the overhead of just doing PIO.

Attachment: signature.asc
Description: PGP signature