[PATCH 4/4] media: gc2145: Fix the RGB MBUS format

[Maxime Ripard]

The GalaxyCore GC2145 is an MIPI-CSI2 sensor. is an HDMI to MIPI-CSI2
bridge. Among others, it support the MIPI-CSI2 RGB565 format, listed in
the driver as MEDIA_BUS_FMT_RGB565_1X16.

Most CSI2 receiver drivers then map MEDIA_BUS_FMT_RGB565_1X16 to
V4L2_PIX_FMT_RGB565.

However, V4L2_PIX_FMT_RGB565 is defined as having its color components
in the R, G and B order, from left to right. MIPI-CSI2 however defines
the RGB565 format with blue first.

This essentially means that the R and B will be swapped compared to what
V4L2_PIX_FMT_RGB565 defines.

The proper MBUS format would be BGR565, so let's use that.

Fixes: 03cc7fefbb09 ("media: i2c: gc2145: Galaxy Core GC2145 sensor support")
Signed-off-by: Maxime Ripard <mripard@xxxxxxxxxx>
---
 drivers/media/i2c/gc2145.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/i2c/gc2145.c b/drivers/media/i2c/gc2145.c
index ba02161d46e723d14e8670ef89ba10b270d7d178..12ce1c7aa0a9e028bd7d4c84356e0e166294a1f6 100644
--- a/drivers/media/i2c/gc2145.c
+++ b/drivers/media/i2c/gc2145.c
@@ -579,11 +579,11 @@ static const struct gc2145_format supported_formats[] = {
 		.colorspace	= V4L2_COLORSPACE_SRGB,
 		.datatype	= MIPI_CSI2_DT_YUV422_8B,
 		.output_fmt	= 0x03,
 	},
 	{
-		.code		= MEDIA_BUS_FMT_RGB565_1X16,
+		.code		= MEDIA_BUS_FMT_BGR565_1X16,
 		.colorspace	= V4L2_COLORSPACE_SRGB,
 		.datatype	= MIPI_CSI2_DT_RGB565,
 		.output_fmt	= 0x06,
 		.switch_bit	= true,
 	},
@@ -696,11 +696,11 @@ static int gc2145_init_state(struct v4l2_subdev *sd,
 	struct v4l2_rect *crop;
 
 	/* Initialize pad format */
 	format = v4l2_subdev_state_get_format(state, 0);
 	gc2145_update_pad_format(gc2145, &supported_modes[0], format,
-				 MEDIA_BUS_FMT_RGB565_1X16,
+				 MEDIA_BUS_FMT_BGR565_1X16,
 				 V4L2_COLORSPACE_SRGB);
 
 	/* Initialize crop rectangle. */
 	crop = v4l2_subdev_state_get_crop(state, 0);
 	*crop = supported_modes[0].crop;

-- 
2.49.0