Re: [PATCH 2/3] media: vsp1: Reset FCP for VSPD

[Jacopo Mondi]

Hi

On Thu, Jun 12, 2025 at 12:37:57PM +0300, Laurent Pinchart wrote:
> On Thu, Jun 12, 2025 at 11:33:39AM +0200, Geert Uytterhoeven wrote:
> > On Thu, 12 Jun 2025 at 09:19, Laurent Pinchart wrote:
> > > On Mon, Jun 09, 2025 at 09:01:43PM +0200, Jacopo Mondi wrote:
> > > > From: Koji Matsuoka <koji.matsuoka.xm@xxxxxxxxxxx>
> > > >
> > > > According to H/W manual v1.00, VSPD must be excecuted
> > > > FCP_RST.SOFTRST after VI6_SRESET.SRST. So this patch adds it.
> > > > VSPDL is not applicable.
> > >
> > > According to the R-Car Gen3 H/W manual v1.00, the FCP must be reset
> > > after resetting the VSPD, except for the VSPDL. Do so.
> >
> > "Rev.1.00"
> >
> > Stil, that is a very old version. "Rev.2.40" is 6 years younger...
>
> The good thing is that both document the reset procedure the same way
> :-)

I didn't want to modify Matsuoka-san original commit message, but if
it's appropriate to do so I will

Thanks
  j

>
> --
> Regards,
>
> Laurent Pinchart