[PATCH v2 3/5] ARM: dts: aspeed: harma: add ADC128D818 for voltage monitoring

[Peter Yin]

Add the ADC128D818 device to I2C bus 29 to support voltage monitoring
on the Harma platform. This enables accurate measurement of system
voltages through the onboard ADC.

Signed-off-by: Peter Yin <peteryin.openbmc@xxxxxxxxx>
---
 .../boot/dts/aspeed/aspeed-bmc-facebook-harma.dts   | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
index 344e20394665..25b873ace2ea 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
@@ -529,6 +529,19 @@ eeprom@54 {
 				compatible = "atmel,24c64";
 				reg = <0x54>;
 			};
+
+			adc@1d {
+				compatible = "ti,adc128d818";
+				reg = <0x1d>;
+				ti,mode = /bits/ 8 <1>;
+			};
+
+			adc@1f {
+				compatible = "ti,adc128d818";
+				reg = <0x1f>;
+				ti,mode = /bits/ 8 <1>;
+			};
+
 		};
 		imux30: i2c@2 {
 			#address-cells = <1>;
-- 
2.25.1