[PATCH] arm64: dts: cavium: thunder2: Add missing PL011 "uartclk"

[Rob Herring (Arm)]

The PL011 IP has 2 clock inputs for UART core/baud and APB bus. The
Thunder2 SoC is missing the core "uartclk". In this case, the Linux
driver uses single clock for both clock inputs. Let's assume that's how
the h/w is wired and make the DT reflect that.

Signed-off-by: Rob Herring (Arm) <robh@xxxxxxxxxx>
---
Arnd, Please apply directly.

 arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi b/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi
index 6dfe78a7d4ab..966fb57280f3 100644
--- a/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi
+++ b/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi
@@ -136,8 +136,8 @@ uart0: serial@402020000 {
 			reg = <0x04 0x02020000 0x0 0x1000>;
 			interrupt-parent = <&gic>;
 			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk125mhz>;
-			clock-names = "apb_pclk";
+			clocks = <&clk125mhz>, <&clk125mhz>;
+			clock-names = "uartclk", "apb_pclk";
 		};
 	};
 
-- 
2.47.2