[PATCH] arm64: dts: ti: k3-am69-sk: Add idle-states for remaining SERDES instances

[Hrushikesh Salunke]

In AM69 SoC there are 4 instances of the 4 lane SERDES. So in
"serdes_ln_ctrl" node there are total 16 entries in "mux-reg-mask"
property. But "idle-states" is defined only for the lanes of first two
SERDES instances. For completeness, set the "idle-states" of lanes of
remaining SERDES instances to a default value of "unused".

Signed-off-by: Hrushikesh Salunke <h-salunke@xxxxxx>
---
This patch is based on commit
475c850a7fdd  Add linux-next specific files for 20250606

 arch/arm64/boot/dts/ti/k3-am69-sk.dts | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am69-sk.dts b/arch/arm64/boot/dts/ti/k3-am69-sk.dts
index f28375629739..dcd7eb079766 100644
--- a/arch/arm64/boot/dts/ti/k3-am69-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am69-sk.dts
@@ -1295,7 +1295,11 @@ &serdes_ln_ctrl {
 	idle-states = <J784S4_SERDES0_LANE0_PCIE1_LANE0>, <J784S4_SERDES0_LANE1_PCIE1_LANE1>,
 		      <J784S4_SERDES0_LANE2_PCIE3_LANE0>, <J784S4_SERDES0_LANE3_USB>,
 			<J784S4_SERDES1_LANE0_PCIE0_LANE0>, <J784S4_SERDES1_LANE1_PCIE0_LANE1>,
-			<J784S4_SERDES1_LANE2_PCIE0_LANE2>, <J784S4_SERDES1_LANE3_PCIE0_LANE3>;
+			<J784S4_SERDES1_LANE2_PCIE0_LANE2>, <J784S4_SERDES1_LANE3_PCIE0_LANE3>,
+			<J784S4_SERDES2_LANE0_IP2_UNUSED>, <J784S4_SERDES2_LANE1_IP2_UNUSED>,
+			<J784S4_SERDES2_LANE2_IP3_UNUSED>, <J784S4_SERDES2_LANE3_IP3_UNUSED>,
+			<J784S4_SERDES4_LANE0_IP3_UNUSED>, <J784S4_SERDES4_LANE1_IP3_UNUSED>,
+			<J784S4_SERDES4_LANE2_IP3_UNUSED>, <J784S4_SERDES4_LANE3_IP4_UNUSED>;
 };
 
 &serdes_wiz0 {
-- 
2.34.1