Re: [PATCH v9 04/16] PCI/AER: Dequeue forwarded CXL error

[Bowman, Terry]

On 6/6/2025 10:57 AM, Dave Jiang wrote:
>
> On 6/3/25 10:22 AM, Terry Bowman wrote:
>> The AER driver is now designed to forward CXL protocol errors to the CXL
>> driver. Update the CXL driver with functionality to dequeue the forwarded
>> CXL error from the kfifo. Also, update the CXL driver to begin the protocol
>> error handling processing using the work received from the FIFO.
>>
>> Introduce function cxl_prot_err_work_fn() to dequeue work forwarded by the
>> AER service driver. This will begin the CXL protocol error processing
>> with a call to cxl_handle_prot_error().
>>
>> Update cxl/core/ras.c by adding cxl_rch_handle_error_iter() that was
>> previously in the AER driver.
>>
>> Introduce sbdf_to_pci() to take the SBDF values from 'struct cxl_prot_error_info'
>> and use in discovering the erring PCI device. Make scope based reference
>> increments/decrements for the discovered PCI device and the associated
>> CXL device.
>>
>> Implement cxl_handle_prot_error() to differentiate between Restricted CXL
>> Host (RCH) protocol errors and CXL virtual host (VH) protocol errors.
>> RCH errors will be processed with a call to walk the associated Root
>> Complex Event Collector's (RCEC) secondary bus looking for the Root Complex
>> Integrated Endpoint (RCiEP) to handle the RCH error. Export pcie_walk_rcec()
>> so the CXL driver can walk the RCEC's downstream bus, searching for
>> the RCiEP.
>>
>> VH correctable error (CE) processing will call the CXL CE handler. VH
>> uncorrectable errors (UCE) will call cxl_do_recovery(), implemented as a
>> stub for now and to be updated in future patch. Export pci_aer_clean_fatal_status()
>> and pci_clean_device_status() used to clean up AER status after handling.
>>
>> Signed-off-by: Terry Bowman <terry.bowman@xxxxxxx>
>> ---
>>  drivers/cxl/core/ras.c  | 92 +++++++++++++++++++++++++++++++++++++++++
>>  drivers/pci/pci.c       |  1 +
>>  drivers/pci/pci.h       |  8 ----
>>  drivers/pci/pcie/aer.c  |  1 +
>>  drivers/pci/pcie/rcec.c |  1 +
>>  include/linux/aer.h     |  2 +
>>  include/linux/pci.h     | 10 +++++
>>  7 files changed, 107 insertions(+), 8 deletions(-)
>>
>> diff --git a/drivers/cxl/core/ras.c b/drivers/cxl/core/ras.c
>> index d35525e79e04..9ed5c682e128 100644
>> --- a/drivers/cxl/core/ras.c
>> +++ b/drivers/cxl/core/ras.c
>> @@ -110,8 +110,100 @@ static DECLARE_WORK(cxl_cper_prot_err_work, cxl_cper_prot_err_work_fn);
>>  
>>  #ifdef CONFIG_PCIEAER_CXL
>>  
>> +static void cxl_do_recovery(struct pci_dev *pdev)
>> +{
>> +}
>> +
>> +static int cxl_rch_handle_error_iter(struct pci_dev *pdev, void *data)
>> +{
>> +	struct cxl_prot_error_info *err_info = data;
>> +	struct pci_dev *pdev_ref __free(pci_dev_put) = pci_dev_get(pdev);
>> +	struct cxl_dev_state *cxlds;
>> +
>> +	/*
>> +	 * The capability, status, and control fields in Device 0,
>> +	 * Function 0 DVSEC control the CXL functionality of the
>> +	 * entire device (CXL 3.0, 8.1.3).
>> +	 */
>> +	if (pdev->devfn != PCI_DEVFN(0, 0))
>> +		return 0;
>> +
>> +	/*
>> +	 * CXL Memory Devices must have the 502h class code set (CXL
>> +	 * 3.0, 8.1.12.1).
>> +	 */
>> +	if ((pdev->class >> 8) != PCI_CLASS_MEMORY_CXL)
> Should use FIELD_GET() to be consistent with the rest of CXL code base
>
>> +		return 0;
>> +
>> +	if (!is_cxl_memdev(&pdev->dev) || !pdev->dev.driver)
> I think you need to hold the pdev->dev lock while checking if the driver exists.
Hi Dave,

Wouldn't a reference count increment prevent the driver from being unbound and thus
make this access here to the driver safe (given the pci_dev_get() above)? And a lock
would prevent concurrent access with a busy wait when the driver executes the next
lock take?

Terry

[snip]