[PATCH v2 4/4] arm64: dts: imx95-19x19-evk: add GPIO reset for ethphy0

[Frank Li]

From: Wei Fang <wei.fang@xxxxxxx>

Add GPIO reset for ethphy0.

Signed-off-by: Wei Fang <wei.fang@xxxxxxx>
Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
---
change in v2
- none
---
 arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
index b6822b56374c4..48ca09464e832 100644
--- a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
@@ -505,6 +505,9 @@ &netc_emdio {
 
 	ethphy0: ethernet-phy@1 {
 		reg = <1>;
+		reset-gpios = <&i2c5_pcal6408 2 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
 		realtek,clkout-disable;
 	};
 };
-- 
2.34.1